DCC Accessories

Part Number05240149 UPC816757011059 Dimensions: 2.14" x 0.640” x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch frogs • Stalling • Sound interruption • Light...

Part Number05240146 UPC816757010977 Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC “Quick Plug” with small no halt module installed. Caution: Not for use with more than 15 Volts track voltage

Part Number05240132 Dimensions.34 x .7 x .12in. 8.6 x 18 x 3.2mm UPC816757010533 Generic, Thin, 1 Amp 4 Function w/8 Pin NMRA Plug

Part Number5240165 NCE5240165 Lighting decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built in resistors Features of this decoder:: • Works with DCC or DC (limited operation on DC) • Includes mating connectors...

Part Number05240119 Dimensions0.34" x 0.7" x 0.12" 8.6 x 18 x 3.2 mm UPC816757010410 1 Amp rating and four function outputs. Size: W .34" x L .70" x D .120".

This decoder is made to fit the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board in the locomotive. No need to remove the weight. The decoder provides a means to install a white LED or 12 Volt bulb as a...

Part Number05240127 N12A0e For N-scale Intermountain Tunnel Motors

FOR TWIN COIL SWITCH MACHINES ONLY All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses (1-2044) Runs from track power or external 9-15 Volt DC power supply...

Part Number05240112 Dimensions1.45 x 3.75 x .625 in. 37 x 96 x 15 mm UPC816757010366 This Silent Running decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has...

Part Number05240147 UPC816757010984 Direct plug in to locos equipped with NMRA 8 pin plug Features of this decoder:: NCE No-Halt_Insurance technology, keeps locos moving over dirty track Supplied as two pre-wired modules for easier, more flexible...

NCE 5240148 NO HALT SMALL

NCE 5240173 D13W DECODER 10 PACK

Part Number5240162 Dimensions15 x 18 x 5 mm NCE5240162 UPC816757011653 6 pack of the Light-It Universal Lighting and Signal Decoder. Lighting decoder w/built-in white LED Features of this decoder:: • Works on DCC or DC (limited operation on DC) • Works...

D13J decoder 4 pack - new smaller replacement for D13SRJ

Part Number05240142 UPC816757010588 N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9

D13WP decoder with 8 pin plug - new smaller replacement for D13SRP Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm Silent Running torque compensated motor drive Torque Compensation for ultra smooth low speed performance Motor rating 3/4 Amp...

Part Number5240171 Dimensions1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm NCE5240171 D13W Decoder - new smaller replacement for D13SR Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm Silent Running torque compensated motor drive Torque...

NCE 5240152 BUTTON BOARD USE W/0151