Other Control Accessories

Features:Simple programming of DCC Addresses with the push of just a few buttons.No confusing menusStandalone design requires no preexisting DCC System8-pin NMRA decoder slot for use with aftermarket decodersProgram track output for preinstalled on-board...

This multifaceted control box can be used to turn up to four electrical circuits on and off. Examples would be electrically separated track blocks or street lights. Each toggle switch is used to turn a current circuit on or off. Depending on your...

Allows for the addition of the LCS SensorTrack to a layout that does not use FasTrack. Each module can control up to four (4) individual sensors. Module includes two (2) sensors with cabling. Additional sensors available for separate sale. Sensors...

Purpose created for use with the Z-Stuff DZ-2500 switch machine. Provides serial line for DZ-2500 TMCC operation. Non-derail operation compatibility. Monitor up to 7 DZ-2500 throw positions on LCS APP. Additionally, module has 4 block power control...

Kato 22-102 N/HO Scale Analog Sound Box

Introducing the ideal transformer for operating trains and accessories on expanding and medium-size layouts! From the Postwar-inspired styling of the controller, to the mighty PowerHouse power supply that provides a circuit breaker and on/off switch,...

The AR-1CC is identical to the standard AR-1 except that it contains the 4 Opto-Sensors necessary to provide fully automated reverse loop polarity switching for command control layouts.

The CIRCUITRON SNAPPER™ is an advanced design, solid state controlled switch machine power supply. Operating from the accessory terminals of a power pack or f r o m a n y sm a ll A C transformer of 25 volts or less, the SNAPPER™ provides...

The TL-1 provides the timing circuitry to accurately reproduce the standard US style four step traffic light sequence. The outputs will drive LED or incandescent lamp signals (not included). If LED signals are used, they must be common anode (+) design...

The CIRCUITRON BR-1 Bell Ringer is ideal for use with any of our grade crossing systems. The BR-1 is designed to power a standard mechanical doorbell (a 2½” doorbell is included). This combination is less costly than digital recordings and...

Mounting bracket and mechanism utilize the TORTOISE™ (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order board or upper/ lower quadrant semaphore signal having a vertical control wire extending...

The CIRCUITRON TP-3 Track Power Adapter is a voltage regulator circuit which has an adjustable output that can be set by the modeler to supply either 1.5 or 3.0 volts DC. The TP-3 is ideal for use as a constant lighting source in unpowered rolling stock...

The CIRCUITRON TC-3 functions exactly the same as the TC-1 above, but the output is designed to drive the CIRCUITRON TORTOISE™ Switch Machine. The TC-3 can also be used with Switchmaster™ and other brands of stall-motor switch machines that...

Circuitron 6200 Smail Slow Motion Actuator With Integrated Logic Switch Machine

The RS-2 is a specially designed self-latching reed switch. It requires no bias magnet and no adjustments to perform the same function as the RS-1. The RS-2 measures 0.75” x 0.1” and can control up to 0.25 amps.

The CIRCUITRON Arc Welder Circuits utilize 2 lamps, one yellow and one blue, along with a circuit that provides a random flickering effect of the lamps. The result is a very convincing representation of an arc welder in operation. The AW -1 includes 1.4...

The CIRCUITRON Remote Tortoise™ Mount consists of a molded base mechanism to which the TORTOISE™ (not included) is mounted. An adjustable lever arm is fastened onto the TORTOISE™ output and drives a stainless steel wire inside a...

The CIRCUITRON TD-1 is designed to connect to the output of any CIRCUITRON Detection Circuit (the DT-4 is the usual choice) and will provide a variable delay period (adjustable from 0 to over 1 minute) which can be used to control accessories, to provide...

Bachmann Trains is pleased to announce the next generation of the E-Z Command DCC Control System: E-Z Command Plus. With E-Z Command, digital control of speed, lighting, sound, and direction of multiple locomotives is at your fingertips, as well as...

Capable of lowering a power pack's top voltage output by 4 volts If you've been having top voltage issues, here's a solution. The Universal Voltage Reducer lowers the top voltage output of the unit by approximately 4 volts. It works for any gauge and is...

Glass circuit breaker rated at 1 amp.

Model Rectifier Corp 1517 10mm Round Speaker

Alpha Panel Layout panel for NCE and Roco Alpha-Panel is a universal Command bus extension panel designed for use with all DCC systems that utilise RJ-12 RS485-type command bus structures. Alpha-Panel is of course the perfect choice for Cobalt Alpha...

DCC Concepts DCP-TMB Cobalt Installation Template

2 12v DC Split Power Supply Kit. (inc PCB and 2x Universal Wall Plugs)This DCCconcepts (+12 (0v) (-12) split-rail power supply kit includes 2x 1 amp 12v world-approved power supplies and a plug-and-play PCB which includes additional filtering for smooth...

Very simple set-up of ABC. Versatile adjustment of ABC with both slow down and stop, intermediate running speed and acceleration rates/distances. Implementation of adjustable slow down and stopping sections for automation of terminal station stopping,...

Power your railroad empire with an advanced 180-Watt PowerHouse Power Supply. UL - listed for safe operation, this mighty power supply is perfect for your TMCC Track Power Controller or Direct Lock-on.

Voltage tester for 1:43, 1:32, and 1:24 slot tracks

Replacement sign controllers are now available. We offer them in two sizes, large and small. The large inverters are for our very largest signs such as our Esso and Texaco or Drive-in signs. These inverters are not replacements for our 8 channels signs.

#4804 - Converter module. This unit will replace your battery pack. It will let you run your signs off track voltage or your power pack. Accepts an input voltage from 5 to 17 volts, AC or DC and outputs the required 4.5 volts for our signs. Will run up...

For controlling turnouts from underneath the layout by choke rod or switch machine. Virtually impossible to see from above. Works with any type switch machine. Can be used with choke rod. Comes with mounting screws and piano wire.

WiFi Control your Layout from Tablets and Smart Phones With LCS Wi-Fi, you can operate your model railroad using devices such as the Apple iPad, computers, smart phones or other Wi-Fi devices. LCS Wi-Fi can create its own independent WiFi network or...

Atlas Model Railroad 70000050 Signal Attachment Cable

Atlas Model Railroad 70000046 Signal Control Board

PECO PECOLECTRICS TWISTLOCK MOTOR TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vAC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can...

TURNTABLE MOTOR Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the controls allow for small adjustments...

PECO PECOLECTRICS TWISTLOCK TWIN MICROSWITCH TwistLock Twin Microswitch to be used with PL-1000 for option to switch polarities, or to operate signals or panel lights etc. Easy to fit to PL-1000, simply twist and lock onto Twistlock point motor. PL-26...

80 Watt AC power supply Throttle lever to control speed and power. Operate your favorite features with the bell, whistle/horn, and direction buttons. 0-18 volt variable programmable AC output for accessory operation Compatible power supply...

LCS CSM2 DZ-2500 BREAKOUT BOARD Enhance your Lionel Layout Control System with our LCS CSM2 DZ-2500 Breakout Board! Purpose created for use with the Z-Stuff DZ-2500 Switch Machine. Allows for easier and faster wiring of your DZ-2500 switch...

Atlas Model Railroad 70000054 Signal Extension Long Cable

Atlas Model Railroad 70000053 Signal Extension Medium Cable

Atlas Model Railroad 70000058 SCB Interconnect Cable Medium

To add integrated signal operation of two or more signals, plug in the modular Atlas Signal Cable

This unit is a current inverter for the 66630/66361 and 60041/60061 switched mode power packs to change the voltage from DC to AC or for connections with accessories using DC voltage. The AC voltage can be used for solenoid accessories that must be...

The Connect-6021 is for bidirectional connections between the former Marklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola format as well as mfx) with the 6021 Control Unit,...

Distribution device for connections for up to a maximum of 5 MS II to an output on the 60112 or 60113 digital connector box. An MS II Hub can be connected to both outputs on the connector box. Hence, up to a maximum of 10 MS II connected to the 60112 or...

Central air conditioner units for rooftops or ground installations. Use #2705 for larger commercial or residential units in HO and smaller commercial or residential units in S and O scale. Kit includes 3 ea lasercut adhesive backed lazerboard and...

22-019 Kato Smart Device Controller for use alone or with Kato Sound Box A/C Adapter sold separately Includes: Smart Device Controller Communication Cable for Sound Box

Kato Power Supply 16V Outputs DC16V 2.1A Ideal for HO Gauge Layouts Can be used with the 22-019 Smart Device Controller or 22-018-1 Power Pack Standard SX

Precise motor and/or light control, Operation of accessory speed, direction, or function from the CAB remote controller, programmable accessory motor speed or light intensity, operates up to two motors and up to four lights (LED not supported). PRODUCT...

Central air conditioner units for rooftops or ground installations. Use #1705 for smaller commercial or residential units in HO and larger commercial/residential for N & Z. Kit includes 4 ea. lasercut adhesive backed lazerboard and basswood air...

PECO PECOLECTRICS SWITCH CONSOLE Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches. Recommended to be used with: PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches

Woodland Scenics FS641 Field System Power Supply

This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc

SCB Interconnect Cable Connector All Scales Signal System

Signal Attachment Cable - All Scales Signal System -- Dual 4-pin harness DIY set

Atlas 215 HO Scale Selector

Atlas 70000052 SIGNAL ATTCH CABLE SHORT

A double-pole, double-throw relay with an actuating mechanism driven by a momentary-power, twin coil solenoid. (A solenoid is a cylindrical coil of insulated wire in which an iron core is made to move back and forth by a flow of electric current.) With...

Peco PL-26B All Scales PASS CONT SW-BLACK LEVER

Bachmann Trains E-Z Command Automatic Reverse Loop module

Kato 24-848 STOP SIGNAL SWITCH

DCC Concepts DCDZ218 ZEN 218 21 & 8 PIN 4/FUNC

DCC Concepts DCDZN8D ZEN 8PIN 4FUNC KEEP ALIVE

This is a Kato 24843 Adapter Cord. Feeder adaptor cord for other Powerpacks.The Trainz SKU for this item is P11490580.Condition: NewTCA Grade: C-10Original Box: YesManufacturer: KatoModel Number: 24-843Scale/Era: N ScaleModel Type: TransformersThe...

DCC Concepts DCC218650 6-FUNC 21 TO 8 ADAP 50/PA \n \n \n \n6-function 21 to 8 Pin Adapter (50 Pack) \nPrice: £141.63Tax Free \n6-function 21 to 8 Pin Adapter (50 Pack) \n \nFor installers and resellers or even those with huge fleets… we also offer a...

DCC Concepts CMFP MOUNTING FOAM PADS 12/PK

DCC Concepts CBS COBALT S LEVER - SINGLE

DCC Concepts DCDZN6D ZEN 6PIN 2FUNC KEEP ALIVE

DCC Concepts CMSD COBALT SPST SW/LED 6 PK

DCC Concepts AD4 4WAY ACCESSORY DECODER\nCobalt DCC Decoder \nStall Motor Drive Type \n(4-way Output)\nPrice: $49.95Tax Free\nAD4 is a four output DCC accessory decoder for Cobalt type motors. It can be wired close to the point motors or at the panel,...

DCC Concepts CS99 99 BRASS NUMBERS/CBS LEVR

DCC Concepts LINK 48 ASST LINKS FOR SS

DCC Concepts DCWTMP2 COBALT INSTAL TEMPLATE

DCC Concepts CB12A COBALT OMEGA CLASSIC 12/P

DCC Concepts CSD COLBALT S - DETAILING

DCC Concepts DCDADS2SX ACCESSORY DECODER 2-WAY

DCC Concepts DCDZN68 ZEN 6PIN VERS 2FUNC ALIVE

Lionel has made it easy to make any FasTrack layout accessible to the Plug-n-Play system. All you have to do is buy your power supply today!.

Peco PLS-120 All Scales SMARTSWITCH CONTRL BOARD

Peco PL-20 HO Scale TRACK ISOLATING SWITCH

Operate motorized accessories with prototypical speed and direction.Features include: ?Precise motor and/or light control?Operation of accessory speed, direction, or function from the CAB remote controller?Programmable accessory motor speed or light...

Use Kato accessories to complete or expand your Unitrack layout. Used with 24829 but has 4 turnout compatible plug on one side.

Kato 24-84TC #N & HO REPLC TURNOUT CBL

DCC Concepts CML BALLAST PACK 12PK

DCC Concepts DCDZ360 ZEN 360 8PIN 4FUNC ALIVE

Peco PL-23 All Scales ON-ON SWITCH

Peco PL-17 HO Scale PROBE FOR PL-18

Peco PL-22 All Scales ON-OFF SWITCH

LIONEL 6-14186 TMCC Accessory Voltage Controller

Running multiple locomotives has never been easier! Use this single remote to operate any of your LionChief Plus locomotives. Your need for multiple remotes are a thing of the past. It's that simple. Choose to run one, two, or three locomotives at any...

Lionels LEGACY PowerMaster provides superior AC track-voltage control for your command-equipped layout Use it with any Lionel remote to remotely adjust track power from a Lionel PowerHouse or other external AC transformer (sold separately). Now, run...