DCC Accessories

Atlas 343 &DCC 15'CABLE WIRE

Adding the E-Z Command Dynamis Pro Box to your Dynamis DCC system delivers more versatility to your railroad. The Dynamis Pro Box allows the use of three additional wireless controllers (maximum four), additional wireless receivers, and the use of...

Used in conjunction with the E-Z Command Walk-Around Companion, multiple connector panels let you establish a series of control points virtually anywhere on the perimeter of your layout. ? plug-in port ? oversee railroad operations from convenient...

Dual Relay Add On Switch It/Switch 8

Part Number5240310 NCE5240310 5 pack of 5 pin wiring harness sets

Part Number5240311 NCE5240311 4 pack of 6 pin wiring harness sets

NCE 5240028 DB5 ADDON BOOSTER FOR SB5

NCE 5240043 CAB06P INTERMEDIATE CAB

Part Number05240111 Dimensions1.2 x 2.30 x.375 in. 31 x 59 x 9.5 mm UPC816757010359 This is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven...

Part Number0524-0120 Dimensions2.65" x 0.370" x 0.120" UPC816757010427 Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Four...

Part Number05240122 Dimensions3.475" x 0.370" x 0.120" UPC816757010441 Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed. Size: 3.475" x 0.370" x 0.120".

Part Number05240127 N12A0e For N-scale Intermountain Tunnel Motors

Part Number05240128 Dimensions1.15" x 0.40" x 0.11" UPC816757010496 Plug-In For ConCor PA1, 4-8-4, etc. 4-Function

Part Number05240132 Dimensions.34 x .7 x .12in. 8.6 x 18 x 3.2mm UPC816757010533 Generic, Thin, 1 Amp 4 Function w/8 Pin NMRA Plug

Part Number05240142 UPC816757010588 N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9

Part Number05240146 UPC816757010977 Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC “Quick Plug” with small no halt module installed. Caution: Not for use with more than 15 Volts track voltage

Part Number05240147 UPC816757010984 Direct plug in to locos equipped with NMRA 8 pin plug Features of this decoder:: NCE No-Halt_Insurance technology, keeps locos moving over dirty track Supplied as two pre-wired modules for easier, more flexible...

NCE 5240148 NO HALT SMALL

Part Number05240149 UPC816757011059 Dimensions: 2.14" x 0.640” x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch frogs • Stalling • Sound interruption • Light...

NCE 5240152 BUTTON BOARD USE W/0151

Part Number5240165 NCE5240165 Lighting decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built in resistors Features of this decoder:: • Works with DCC or DC (limited operation on DC) • Includes mating connectors...

Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips Kato RS2 Kato RSC2 Kato SD80 Kato SD80MAC Kato SD90/43MAC Life Like RS2 Walthers GP18 Walthers RS2

Part Number5240171 Dimensions1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm NCE5240171 D13W Decoder - new smaller replacement for D13SR Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm Silent Running torque compensated motor drive Torque...

D13W decoder 4 pack - new smaller replacement for D13SR

D13J decoder 4 pack - new smaller replacement for D13SRJ

D13WP decoder with 8 pin plug - new smaller replacement for D13SRP Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm Silent Running torque compensated motor drive Torque Compensation for ultra smooth low speed performance Motor rating 3/4 Amp...

Part Number05240211 UPC816757010717 Plug-pack, NMRA 8 pin plugs, 10 pack

Part Number05240212 NCE05240212 4.75" (1/2 wave effective) Antenna 916.50 Mhz

NCE 5240215 P515 15VOLT AC/5AMP SUPPL\nP515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc.\n\nThis is a basic 5amp AC transformer with an internal 5 amp fuse that is not user replaceable.

Part Number05240219 UPC816757010724 Decoder Test Kit. Perfect companion to DCC installation and operation. The decoder tester works with ANY DCC decoder. Test for motor forward and reverse, functions F0F, F0R, 1, and 2.

NCE 5240220 RJ12-40 RPT1 CABLE WIRING

NCE 5240227 CP6, 6 ZONE DCC PROTECTOR

Part Number05240235 UPC816757010847 8 wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.

NCE 5240238 P514 5 AMP DC POWER 13.8

NCE 5240239 P314 3 AMP SUPPLY TWIN

Part Number5240243 LED lighting, 20 LEDs, LED Tester, 50 feet ultra flex #32 wire, 40 resistors, 3 sizes heatshrink

P114-UK SKU 5240244 UK version of 13.8 Volt DC, 24 Watt power supply suitable for Power Cab.

https://dqzrr9k4bjpzk.cloudfront.net/images/5106026/980620932.jpg

3300 Ohm resistor, 1/8 Watt, qty 20

Warm white LED, 3mm, qty 20

Track Bus Taps, (Blue), package of 32, 14-16AWG

Track Bus Taps, (Yellow), package of 32, 10-12AWG

Male Quick Connect, (Red), package of 32, 18-22AWG

Male Quick Connect, (Red), package of 64, 18-22AWG

DCC Main Bus Wire, (Red), 14AWG, 100 Feet

Track Bus Taps, (Blue), package of 20, 14-16AWG

Male Quick Connect, (Red), package of 20, 18-22AWG

Part Number5240291 NCEAND-24 24 Anderson power poles, 12 red, 12 black, 12-16 AWG

Part Number5240292 NCEEuro2-5 2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG

Part Number5240293 NCEEuro3-5 3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG

Part Number5240295 NCEEuro6-3 6 circuit Eurostyle Term strip, Package of 3, 14-24 AWG.

Part Number5240297 NCEEuro12-2 12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.

Part Number5240299 Dimensions100ft of 20mm (.787) NCEKAP20 100ft of 20mm (.787) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg...

NCE 5240302 8 pack N.O. Momentary SPST Pushbutton Green 1/4 mounting hole

Part Number5240304 Dimensions.5 x .5 NCETS5D 5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole

Part Number5240305 Dimensions1 x .625 x .5 NCE5240305 UPC81675701184 Use with any DCC system to prevent large voltage spikes. Reduces or eliminates voltage spikes on long runs of DCC bus wire Protects decoders from damaging inductive voltage...

6 pack of .3 farad (300,000 microfarad) 2.7v super capacitors

Part Number5240307 NCE5240307 12 pack of 2 pin wiring harness sets

Part Number5240308 NCE5240308 8 pack of 3 pin wiring harness sets

Part Number5240309 NCE5240309 6 pack of 4 pin wiring harness sets

Cab Bus 6-Wire Flat 7' Cable, RJ12 Connectors

NCE CORPORATION

NCE NCE5240222 Power Cab Connection Panel

FOR TWIN COIL SWITCH MACHINES ONLY All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses (1-2044) Runs from track power or external 9-15 Volt DC power supply...

Power Pro Cab/LED Display w/Potentiometer/Radio

NCE CORPORATION