Electrical & Electronic Parts

OverviewOur newest speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind! George has shown this speaker off in YouTube...

OverviewCool White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the LED, or by the...

OverviewOur tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Dimensions: 13 x 9 x 9.4mm(D)Frequency Response: 100Hz - 10kHzPower: 40mW (Nominal) 75mW (Peak)Impedance: 32 Ohms Note: When...

OverviewThis tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models! Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz - 20kHzPower: .7 Watts (Nominal) 1 Watt (Peak)Impedance: 8...

OverviewSuitable for many HO and larger models. Dimensions: 28 x 4.5mm(D) Frequency Response: 320 Hz - 18kHz Power: 1 Watt (Nominal) 2 Watts (Peak) Impedance: 8 Ohms

OverviewGolden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the LED, or by the...

OverviewSunny White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the LED, or by the...

Overview The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to simplify the wiring connection between a steam locomotive and its tender, providing a quick-disconnect for painting,...

OverviewThis set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.

OverviewIf you have more space, this speaker is great for larger models. Dimensions: 35 x 20 x 5.3mm(D)Frequency Response: 560Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

OverviewIf you have more space, this speaker works well for larger models. Dimensions: 30 x 5.3mm(D) Frequency Response: 490Hz - 10kHz Power: .5 Watt (Nominal) 1 Watt (Peak) Impedance: 8 Ohms

OverviewThis small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz - 13kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

OverviewThis small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 740Hz - 4kHzPower: 1 Watt (Nominal) 1.5 Watts (Peak)Impedance: 8 Ohms

OverviewThis snap-together baffle kit is designed for use with our 28mm round speakers (P.N. 810054 or 810153).

OverviewThis snap-together baffle kit is designed for use with our 20mm round speakers (P.N. 810053).

OverviewThis snap-together baffle kit is designed for use with our 15mm round speakers (P.N. 810089).

OverviewThis tiny speaker has a high-output and works well for N-scale and larger models. Dimensions: 15 x 3.5mm(D) Frequency Response: 780Hz - 15kHz Power: 0.3 Watt (Nominal) 0.5 Watt (Peak) Impedance: 8 Ohms

OverviewGreat sound for your train if you can fit this one in your model! Dimensions: 40 x 28.5 x 11.3mm(D)Frequency Response: 250Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

OverviewReplacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.

OverviewThis tiny, high-output speaker is suitable for N-scale and larger models. Dimensions: 20 x 4.2mm(D)Frequency Response: 750Hz - 9kHzPower: 0.5 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms

OverviewThis assortment includes 6" each of 1/16", 3/32", 1/8" and 1/4" diameter tubing for insulating solder connections.

OverviewThese 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6" of red wire, 6" of black wire, and four pieces of heat-shrink tubing.

PATENTED, ADVANCED TECHNOLOGY DESIGN!Lowest Current Drain Switch Machine Available (4 ma. during operation, 15 ma. at stall).Motor stalls at each end of throw—No Cutoff Contacts Necessary.Precision Engineered Gear-Drive Mechanism (superior to...

Circuitron 6601 ZipZ Solderless Connection System

Speaker - 16.4 x 35.25 x 9.5 mm Speaker with two 11x15mm (4/5 Ohm impedance) sugar cube speakers installed with wire and plug. Works with Bowser, Intermountain, Atlas and Fox Vally Can be wired into many locos by cutting off the plug. 4 mounting holes...

Speaker - 17.5 x 25.5 x 6.7 mm Great for low hood diesels and small steam locos Speaker with two 11x15mm (4/5 Ohm impedance) sugar cube speakers installed with wire Four mounting tabs Bowser will use this speaker in our RS3

50' Stranded Wire, 20 Gauge/Black

Peco PL-30 All Scales LED'S 10 RD/GRN & 20 PANE\nPeco PL-30 LED's & Panel Clip's.\n\nPack contains:-\n\n10 x Red LED's\n10 x Green LED's\n20 x Panel Clip's\n\nTo be used in conjunction with Peco PL-29 Resistors. Pack of 10 1/4 watt, 1000ohm.

The CIRCUITRON DT-4 provides the modeler with an ideal system for spotting a train or even a single piece of rolling stock in a hidden location. The DT-4 actually contains four completely independent detection circuits combined onto one circuit board...

Peco PL-39 All Scales SCREW TERMNL BLOCKS 5 AMP

PECO PECOLECTRICS CABLE CLIPS (PACK OF 20) Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips Recommended to be used with: PL-38 Wire PL-39 Terminal Blocks

Minatronics 1223005 3MM LED BI-POLAR R/G 3LEG

Minatronics 3312502 SPST LED SWITCH 2P/RES RD

Brown Plugs. Gauge: H0. A package comes with 10 pieces. These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations into the sockets on the older versions of control boxes...

Yellow Plugs. Gauge: H0. A package comes with 10 pieces. These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations into the sockets on the older versions of control...

The CIRCUITRON BD-2 is a very sensitive, integrated circuit design block detector which will work with virtually any scale and type of track power, including most forms of command control. The BD -2 works by detecting the current drawn by a locomotive or...