Other Control Accessories

Kato 24-850BK Power Feed Control Switch (Black) (N scale)

Kato 24-840BK Turnout Control Switch (Black) (N/HOscale)

This multifaceted control box can be used to turn up to four electrical circuits on and off. Examples would be electrically separated track blocks or street lights. Each toggle switch is used to turn a current circuit on or off. Depending on your...

Power your railroad empire with an advanced 180-Watt PowerHouse Power Supply. UL - listed for safe operation, this mighty power supply is perfect for your TMCC Track Power Controller or Direct Lock-on.

Voltage tester for 1:43, 1:32, and 1:24 slot tracks

Replacement sign controllers are now available. We offer them in two sizes, large and small. The large inverters are for our very largest signs such as our Esso and Texaco or Drive-in signs. These inverters are not replacements for our 8 channels signs.

#4804 - Converter module. This unit will replace your battery pack. It will let you run your signs off track voltage or your power pack. Accepts an input voltage from 5 to 17 volts, AC or DC and outputs the required 4.5 volts for our signs. Will run up...

Atlas Model Railroad 70000047 Interlock Control Module

Atlas Model Railroad 70000046 Signal Control Board

PECO PECOLECTRICS TWISTLOCK MOTOR TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vAC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can...

TURNTABLE MOTOR Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the controls allow for small adjustments...

PECO PECOLECTRICS TWISTLOCK TWIN MICROSWITCH TwistLock Twin Microswitch to be used with PL-1000 for option to switch polarities, or to operate signals or panel lights etc. Easy to fit to PL-1000, simply twist and lock onto Twistlock point motor. PL-26...

80 Watt AC power supply Throttle lever to control speed and power. Operate your favorite features with the bell, whistle/horn, and direction buttons. 0-18 volt variable programmable AC output for accessory operation Compatible power supply...

Atlas Model Railroad 70000054 Signal Extension Long Cable

Atlas Model Railroad 70000053 Signal Extension Medium Cable

Atlas Model Railroad 70000058 SCB Interconnect Cable Medium

To add integrated signal operation of two or more signals, plug in the modular Atlas Signal Cable

This unit is a current inverter for the 66630/66361 and 60041/60061 switched mode power packs to change the voltage from DC to AC or for connections with accessories using DC voltage. The AC voltage can be used for solenoid accessories that must be...

The Connect-6021 is for bidirectional connections between the former Marklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola format as well as mfx) with the 6021 Control Unit,...

Distribution device for connections for up to a maximum of 5 MS II to an output on the 60112 or 60113 digital connector box. An MS II Hub can be connected to both outputs on the connector box. Hence, up to a maximum of 10 MS II connected to the 60112 or...

Kato Power Supply 12V Outputs DC13.5V 2.2A Ideal for N Gauge Layouts Can be used with the 22-019 Smart Device Controller or 22-018-1 Power Pack Standard SX

Central air conditioner units for rooftops or ground installations. Use #2705 for larger commercial or residential units in HO and smaller commercial or residential units in S and O scale. Kit includes 3 ea lasercut adhesive backed lazerboard and...

22-019 Kato Smart Device Controller for use alone or with Kato Sound Box A/C Adapter sold separately Includes: Smart Device Controller Communication Cable for Sound Box

Kato Power Supply 16V Outputs DC16V 2.1A Ideal for HO Gauge Layouts Can be used with the 22-019 Smart Device Controller or 22-018-1 Power Pack Standard SX

Precise motor and/or light control, Operation of accessory speed, direction, or function from the CAB remote controller, programmable accessory motor speed or light intensity, operates up to two motors and up to four lights (LED not supported). PRODUCT...

Central air conditioner units for rooftops or ground installations. Use #1705 for smaller commercial or residential units in HO and larger commercial/residential for N & Z. Kit includes 4 ea. lasercut adhesive backed lazerboard and basswood air...

Woodland Scenics FS641 Field System Power Supply

This control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, etc

SCB Interconnect Cable, Short 7'

SCB Interconnect Cable Connector All Scales Signal System

Atlas 215 HO Scale Selector

Atlas 70000052 SIGNAL ATTCH CABLE SHORT

A double-pole, double-throw relay with an actuating mechanism driven by a momentary-power, twin coil solenoid. (A solenoid is a cylindrical coil of insulated wire in which an iron core is made to move back and forth by a flow of electric current.) With...

Bachmann Trains E-Z Command Automatic Reverse Loop module

Kato 24-848 STOP SIGNAL SWITCH

This is a Kato 24843 Adapter Cord. Feeder adaptor cord for other Powerpacks.The Trainz SKU for this item is P11490580.Condition: NewTCA Grade: C-10Original Box: YesManufacturer: KatoModel Number: 24-843Scale/Era: N ScaleModel Type: TransformersThe...

Operate motorized accessories with prototypical speed and direction.Features include: ?Precise motor and/or light control?Operation of accessory speed, direction, or function from the CAB remote controller?Programmable accessory motor speed or light...

Use Kato accessories to complete or expand your Unitrack layout. Used with 24829 but has 4 turnout compatible plug on one side.

Kato 24-84TC #N & HO REPLC TURNOUT CBL

LIONEL 6-14186 TMCC Accessory Voltage Controller

Layout Control System Cabling Each LCS installation requires exactly one 6-81499 LCS Power Supply with DB9 Cable. This cable connects your first device to power and your command base (if present). When you add a second and subsequent LCS device to your...

Connect the LionChief 72-Watt Wall Pack Power Supply directly to the LionChief Terminal FasTrack to power any LionChief FasTrack Layout. Now you are ready to run any LionChief or LionChief Plus locomotive, with enough to expand. FasTrack not included!

CONTROLLER 2 (BCP2) Add more functionality with Optional Add-on Component of the Layout Control System. The LCS BPC2 (Block Power Controller) switches up to 8 AC track power blocks. It is configured as 8 normally open relays, split into two banks of four...

Record your favorite scenarios and play them over and over again.Features include: ?Record layout scenarios using your trains and accessories, and play them back with the touch of a button on the CAB remote controller?Make and save up to eight...

Power Direction Control Switch Control box allows you to reverse the direction of a track feeder at will in order to easily implement reversing loops. Manufacturer: Kato. Model Number: 24-851. Scale/Era: N Scale. Model Type: Accessories.

AC Extension Cord, 35" [1 pc]

Lionel Lcs Sensor Track 10 Pdi Cable

Control Box for 2.6 mm / 3/32" Diameter Plug Connections. This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. The unit comes with 8...

Special Order Item-Ships in 4-6 Business Days. Not available for expedited shipping.Here is a Kato 24825 DC Extension Cord.The Trainz SKU for this item is P11490569.Condition: NewTCA Grade: C-10Original Box: YesManufacturer: KatoModel Number:...

Kato 24-844 Power Supply, Automatic 3-Color Signal

Manufacturer: Mrklin Art.-No. 60882 EAN: 4001883608822 Gauge Neutral Delivery Date: 11/2014 s 88 DC Decoder This is a feedback module for current sensors on digitally controlled 2-rail layouts. This module can be plugged into the L88 (60883) with the...

This Double Track Power Cord is part of the N Gauge UNITRACK SYSTEM by Kato. Insert Power Cord plug into socket on underside of Double Track Viaduct Track section. New. Kato Item No. 24828 Backed by Kato Warranty.

Use this device to turn electric power on or off to track section or accessories. It has three SPST on-off switches in parallel. Can be coupled together in to control any number of accessories.

This is a Twin Electrical Control from Atlas Model Railroad Co. Features: The Atlas Twin consists of a pair of double-pole, double-throw switches internally connected to allow independent electrical polarity control at either end of two pairs of output...

Kato 24-842 DC Converter to Connect to a Non-Kato Power Pack\nDC Converter [1 pc]\n• Used to connect #24-840 turnout control switches to a non-Kato Power pack via the accessory output.

Atlas 56 SWITCH CONTROL BOX