Buildings & Structures

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 3.25" x 4.25” Note: Pictures may be of another Road Number.

Modeled from the D&RGW Narrow Gauge Prototype. Note: This is a Narrow Gauge tower and would need to be raised some for Standard gauge. Track and scenery are not included.Footprint: 2.2” wide by 3.0" deep. Note: Pictures may be of another Road...

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front wall and porches only. Footprint: 2.375” x 1.0”

Rslaserkits 2129 HO Scale Plantation Store Façade

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today. This kit can be built either as a wood sided...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a paint. Footprint with Lean-To:5.5" x 7.375"

You used to find small factories like this in lots of towns sitting trackside. Harris Door was started after the first world war and survived the depression by adding more lines of wood working. When the building boom after the second world war hit, they...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included.Footprint: 2.375” x 2.375” x 5.5" tall. Note: Pictures may be of another Road Number.

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts. Footprint: 4" x 4".

Best burgers in town! Kit includes Northeastern Lap siding, Stip wood corners and bracing, Grandt line smoke stack details, Tichy train group door, 3 tab roofing, plus two laser cut picnic tables and signs for at least 4 businesses. Footprint: 1.75” x 2...

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum. Footprint: 3.5" x 3.25"

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Footprint: 2.5” x 4.0”

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the...

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do not have access to a siding so they can unload rail...

Based on the Cherry Valley Lumber Car in the North-West.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's So this station can be used right through the transition period.Footprint: 5.5"...

Based on those found in the pacific northwest from the early 1900s to the end of RR logging. Footprint: 1.625" x 5.125"

The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car and taken to the log camp. The kit is sized to fit on...

This kit is based on one used by the Manary Logging Co. in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side windows are laser cut as double hung and can be positioned in any...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing.Footprint: 5.5 ” x 7.5”. Note: Pictures may be of another Road Number.

Typical 1-1/2 story frame house. These structures can be found anywhere.Footprint: 2.5" x 3.5". Note: Pictures may be of another Road Number.

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 3.7" x 5.0" Note: Pictures may be of another Road Number.

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown, with a footprint of 3 1/2 by 5. The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon for his layout...

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical...

This charming Victorian structure will be right at home on your layout. This kit has been designed to accurately represent the prototype structure in HO scale. Builds either early or late version. Additional white metal details included! More than 230...

Includes Lean-to extension, Several Window, door and chimney options plus 12 wood barrels and 10 pallets. Laser Cut Accuracy - Precise Fit - Easy Assembly.Footprint: Including Steps 7.5” x 4.5” Note: Pictures may be of another Road Number.