Track & Accessories

Detachable hand lever included. Fixed frog and guard rails. Length of the straight side 225 mm / 8-7/8". Turnout branch 14° 26'. Branch radius 902.4 mm / 35-1/2". A 75491 electric turnout mechanism can be installed on these turnouts. HO Scale.

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts. Ho Scale.

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog. 2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece included. Manual hand lever included. Can be retrofitted...

Inner curve: R1 = 360 mm / 14-3/16" / 30°. Outer curve: 30° in the parallel curve spacing of 77.5 mm / 3-1/16". Manual hand lever included. Can be retrofitted with the 74491 turnout mechanism, 74461 digital decoder and 74470 turnout lanterns. HO Scale.

Length 236.1 mm / 9-5/16". Crossing angle 12.1°. Crossing legs electrically isolated from each other. 4 sections of 24071 track are required at the ends of the crossing (not included with 24740). 2 suitable roadbed fill-in pieces included. HO Scale.

R1 = 360 mm / 14-3/16" / 15°. Momentary contact by means of locomotive/car pickup shoe. HO Scale.

Crossing angle 14° 26'. Track length 225 mm / 8-7/8". HO Scale.

Length 2 x 1/2 = 2 x 90 mm / 3-9/16". Continuous contact through wheel sets on locomotives / cars. The two track sections have an insulated rail section for track occupation feedback signal when a train is passing over them. The contact area can be...

Length 1/2 = 90 mm / 3-9/16". Momentary contact with a locomotive/car pickup shoe.

Crossing angle 45°. Track length 90 mm / 3-9/16". HO Scale.

Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases. Length 16.5 mm / 5/8". 10 pieces in a package.

Bachmann Trains Snap-Fit E-Z Track 22 Radius Curved Track (4/card)