RS Laser

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found...

A saloon built in Virginia City, Montana about 1875. It was constructed primarily of rough 6x12 timbers, laid up log cabin style. The finished and ornamented false front provided a sharp contrast to...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut...

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings.Foot Print: 2.25" x 2.625" Note: Pictures may be of another Road Number.

Based on a store in Jefferson Oregon.Footprint: 1 1/4” x 2” Note: Pictures may be of another Road Number.

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 1 3/8" x 2 1/8". Note:...

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 1.75" x 2.0". Note: Pictures may be of another Road Number.

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.Footprint: 1.75" x 2.25". Note: Pictures may be of another Road Number.

False front stores like these were a staple on main streets all over North America.Footprint: 1.75 x 2.25 inches. Note: Pictures may be of another Road Number.

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do...

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines. Note: Pictures may be of another Road Number.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.Footprint 1.25”...

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.Footprint 1.25”...

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.Footprint 1.75” x 3.25”...

Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed. With a foot print of 2" by 6" it has plenty of storage room. Laser kit stud back and end wall framing with plywood...

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 2.0" x 2.7". Note: Pictures may be of...

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown.The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon...

A prefect small building for that down town street or back road.Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light...

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 3.25" x 4.25” Note: Pictures may be of another Road Number.

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. Kit...

A small roof top water tank and tower.foot print- 2x2 inches by 5 inches tallincludes Tichy NWB's Note: Pictures may be of another Road Number.

This is a freelanced 18ft Pickle Car , Kit comes unpainted and needs assembly. Has Tichy and Grandt Line detail parts and is complete except for trucks, coupler and underfloor brake details. Makes...

A O scale version of Our Grove Building.Foot print of 11 3/4 x 8 inches and 11 3/4 tall at signIncludes Tichy windows and doors plus all the back porches. Note: Pictures may be of another Road Number.

The kit has a card sub-frame, laser cut board on board siding with peal and stick metal standing seam roofing, laser cut windows and doors.Footprint: 4.5" x 7" Note: Pictures may be of another Road...

Modeled from the D&RGW Narrow Gauge Prototype. Note: This is a Narrow Gauge tower and would need to be raised some for Standard gauge. Track and scenery are not included.Footprint: 2.2”...

RS Laser SCM103B O Scale Randolph Depot Building Kit Note: Pictures may be of another Road Number.

This Saw Filer Shack is modeled after one that was used Manary Logging Co.In Siletz Country Or. You don't need a logging layout to enjoy this kit, can you picture it being used as a flower shop,...

For that special spot on the layout. See how many of your visitors notice this little gem.