Other Control Accessories

Kato 24-850BK Power Feed Control Switch (Black) (N scale)

The AR-1CC is identical to the standard AR-1 except that it contains the 4 Opto-Sensors necessary to provide fully automated reverse loop polarity switching for command control layouts.

The CIRCUITRON SNAPPER™ is an advanced design, solid state controlled switch machine power supply. Operating from the accessory terminals of a power pack or f r o m a n y sm a ll A C transformer of 25 volts or less, the SNAPPER™ provides...

The TL-1 provides the timing circuitry to accurately reproduce the standard US style four step traffic light sequence. The outputs will drive LED or incandescent lamp signals (not included). If LED signals are used, they must be common anode (+) design...

The CIRCUITRON BR-1 Bell Ringer is ideal for use with any of our grade crossing systems. The BR-1 is designed to power a standard mechanical doorbell (a 2½” doorbell is included). This combination is less costly than digital recordings and...

Mounting bracket and mechanism utilize the TORTOISE™ (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order board or upper/ lower quadrant semaphore signal having a vertical control wire extending...

The CIRCUITRON TP-3 Track Power Adapter is a voltage regulator circuit which has an adjustable output that can be set by the modeler to supply either 1.5 or 3.0 volts DC. The TP-3 is ideal for use as a constant lighting source in unpowered rolling stock...

The CIRCUITRON TC-3 functions exactly the same as the TC-1 above, but the output is designed to drive the CIRCUITRON TORTOISE™ Switch Machine. The TC-3 can also be used with Switchmaster™ and other brands of stall-motor switch machines that...

Circuitron 6200 Smail Slow Motion Actuator With Integrated Logic Switch Machine

The RS-2 is a specially designed self-latching reed switch. It requires no bias magnet and no adjustments to perform the same function as the RS-1. The RS-2 measures 0.75” x 0.1” and can control up to 0.25 amps.

The CIRCUITRON Arc Welder Circuits utilize 2 lamps, one yellow and one blue, along with a circuit that provides a random flickering effect of the lamps. The result is a very convincing representation of an arc welder in operation. The AW -1 includes 1.4...

The CIRCUITRON Remote Tortoise™ Mount consists of a molded base mechanism to which the TORTOISE™ (not included) is mounted. An adjustable lever arm is fastened onto the TORTOISE™ output and drives a stainless steel wire inside a...

The CIRCUITRON TD-1 is designed to connect to the output of any CIRCUITRON Detection Circuit (the DT-4 is the usual choice) and will provide a variable delay period (adjustable from 0 to over 1 minute) which can be used to control accessories, to provide...

Capable of lowering a power pack's top voltage output by 4 volts If you've been having top voltage issues, here's a solution. The Universal Voltage Reducer lowers the top voltage output of the unit by approximately 4 volts. It works for any gauge and is...

Glass circuit breaker rated at 1 amp.

Model Rectifier Corp 1517 10mm Round Speaker

DCC Concepts DCP-TMB Cobalt Installation Template

2 12v DC Split Power Supply Kit. (inc PCB and 2x Universal Wall Plugs)This DCCconcepts (+12 (0v) (-12) split-rail power supply kit includes 2x 1 amp 12v world-approved power supplies and a plug-and-play PCB which includes additional filtering for smooth...

Very simple set-up of ABC. Versatile adjustment of ABC with both slow down and stop, intermediate running speed and acceleration rates/distances. Implementation of adjustable slow down and stopping sections for automation of terminal station stopping,...

Power your railroad empire with an advanced 180-Watt PowerHouse Power Supply. UL - listed for safe operation, this mighty power supply is perfect for your TMCC Track Power Controller or Direct Lock-on.