Buildings & Structures

A prefect small building for that down town street or back road.Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light.Footprint: 3.25" x 4.15" Note: Pictures may be of another Road...

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 3.25" x 4.25” Note: Pictures may be of another Road Number.

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. Kit inclues 2 shacks and 4 bunk bed kits. Thanks to Frank...

Modeled from the D&RGW Narrow Gauge Prototype. Note: This is a Narrow Gauge tower and would need to be raised some for Standard gauge. Track and scenery are not included.Footprint: 2.2” wide by 3.0" deep. Note: Pictures may be of another Road...

Built-&-Ready® Landmark Structure®, Kids Clubhouse, is the local hangout for the neighborhood kids. This rickety building was scabbed together and built entirely from scraps. The exterior is decorated with hand-painted messages and salvaged...

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System . This homey...

Atlas Model Railroad 711 HO Scale Kate's Colonial Home' Kit

Multiple signs for different businessesMolded in colorsEasy-to-apply paper decalsParts are numbered for assemblyEasy to assemble – basic modeling tools required*Kit shown assembled & decorated. PRODUCT SPECIFICATIONSGauge: HO Gauge Dimensions:...

Includes first floor interior and sidewalk detailsMultiple signs for different businessesWindows can be positioned opened or closedMolded in colorsEasy-to-apply paper decalsParts are numbered for assemblyEasy to assemble – basic modeling tools...

Includes first floor interior and sidewalk detailsMultiple signs for different businessesWindows can be positioned opened or closedMolded in colorsEasy-to-apply paper decalsParts are numbered for assemblyEasy to assemble – basic modeling tools...

Includes all three separate building kits plus an additional figure packBuildings can be arranged in any order or used separatelyFigure Pack included!Molded in colorsEasy-to-apply paper decalsParts are numbered for assemblyEasy to assemble – basic...

Bar Mills Models 5052 HO Scale “Pergande’s” is a kit from our “Over-Nighter” Series & features pre-printed walls, signs & weathering… along with both wooden components for trim work as well as plastic/wooden...

Bar Mills Models 5042 HO Scale The Hardware Store (kit)

Bar Mills Models 5022 HO Scale Citywide Transfer (Wood kit)

Bar Mills Models 1240 HO Scale Dolly's Confectionery (Wood kit)

Bar Mills Models 0932 HO Scale Saulenas Tavern (Wood kit)

These small structures can be used individually or combined to make a larger scene. While we call them “cabins” these handy little dwellings can be used along a right-of-way, or even as company houses in a mining scene. These are not complex...

“Earl’s” is typical of small fueling facilities located throughout the country. This one is available in all scales, from “N” thru “O”, the “O” Scale version ONLY being available from “Bar Mills...

Low end kits may bring minimal profits, BUT they also help introduce new people to the hobby… something we take very seriously. There isn’t a model railroad on the planet that can’t use these buildings, especially for the price ! Note:...

Contents: 1 pre-assembled building

Contents: 1 pre-assembled building

Contents: 1 pre-assembled building

Contents: 1 pre-assembled building

It takes more than trains and tracks to build a model railroad! Grow your HO layout with Lionel's assortment of houses and buildings. Create a lifelike scene with these fully assembled, realistically detailed accessories.Fully AssembledMolded detailed...

Bar Mills Models 0532 HO Scale Shaw's Ridge Eqpt

This two-building kit has a “flexible footprint”, it’ll fit just about any space (and can even be broken up into two separate scenes ! ) originally designed for our limited-run “Pinkham’s Pallet” kit we liked this one...

This one comes complete with an outside storage tank, plastic windows, metal details and colorful signs. You can theme this one as either a “Texaco” or “Shell” station… graphics are included for both. Call it...

It seems like almost every structure on our layouts are made of 90-degree corners ! This is the reason westep out-of-bounds once in a while & try something different. Complete with white metal detail castings,signs, some “Insta-Fence” to...

Bar Mills Models 0792 HO Scale Twin Crossing Shacks Kit

This pack of two horse drawn carriages are designed as foreground models and can be super-detailed by the modeler to his/her liking. These kits are complex and are NOT suggested for the casual or less-skilled modeler… we’d prefer not to have...

Named after modeling great Malcolm Furlow (for no good reason other than he was one of the guys that infused so much creativity into the hobby) this kit is a bit of a “puzzle” to assemble, but an easy puzzle ! Note: Pictures may be of another...

Bar Mills Models 0552 HO Scale Shady Grove Texaco Kit

“Honest Joe’s” is more than a structure, it’s a complete scene. With the resin cast dilapidated brick sidewall, and the ageing lean-to, the remnant of of past neighboring structure introduces a story line to this scene. Whether in a run-down section of...

This is one “small” kit that has a huge potential for craftsman-like workmanship. Even just “out-of-the-box” (as pictured) there are enough interesting details to introduce the look & feel of a much mor expensive kit…...

Laser cut construction…. this is one approach in adding interest to an otherwise plain building !

The results are consistent, and with a little extra “dry-brushing” and detailing the shingles can be given even more of a craftsman-type look ! Note: Pictures may be of another Road Number.

The results are consistent, and with a little extra “dry-brushing” and detailing the shingles can be given even more of a craftsman-type look ! Note: Pictures may be of another Road Number.

Although we also offer a resin version of this same concept, these (2) entries are laser-cut with traditional wooden clapboard siding. These make a perfect one-night project, having a few pre-built ones in your arsenal is never a bad idea ! Note:...

Bar Mills Models 02006 HO Scale Forklift

“Stewart’s Rods”…. our tongue-in-cheek tribute to well known modeler Rod Stewart, is a compact structure & a primer to model building all in one kit. From the clapboard / board-& batten & brick wall components to the...

This kit is really a 2-3 night project, the wood is laser-cut, the windows are plastic, and the detailing is minimal. We have introduced our new “slate shingles” with this kit… we love the things, we think you will too ! HO scale is...

The kit is composed of a laser cut plywood and basswood. It is based on Henry Tellers Law Office in Central City, Colorado. It is realtively easy to build but some model building experience is always good. This kit is great for an model railroad. The O...

Laser cut wood, includes signs, platform can be adjusted for height... easy to build, HO Footprint is 4 1/4" x 7 3/4" Note: Pictures may be of another Road Number.

The kit is composed of a laser cut plywood core overlaid with laser cut clapboard and strip wood. This is a fine little kit with lots of assembly enjoyment. Its what makes building kits fun. The kit has wide appeal and will fit any model railroad from...

"Board on laser"... We've cut an interior framework with the laser and then supplied strip wood to be laid over the framwork, makes it look scratch built but we've done the tough part and cut all of the components that make scratch building a chore. The...

A very nice shortline depot, still in existence located close to our shop.. The kit is composed of a laser cut MDF core overlaid with scribed siding. The original had clapboard but we prefer the scribed so we can use a thinner sigin material. Hardly...

Laser cut wood, heavy ;aser cut timber for retaining walls. This model is based on the truck dump located at Silverton, CO. Back your tucks up to the tipple and dump, then fill your gons with the ore.... Realtively easy to build. Footprint is 3" wide by...

Gotta have a place to keep all that railroad junk! Laser cut, easy to build. These are the size of narrow gauge wood cars... Note: Pictures may be of another Road Number.

Laser cut plywood and basswood, includes signs. Our version represents the depot as it was pre-1960's. Oddly there are very few photos of the depot that date back prior to the 1950's, probably because access to Chama was limited other than by rail. The...

This is a laser cut basswood kit. The kit is based on a C&NW prototype, is easy to build and will fit well on any layout. Foot print is a scale 8' x 10' Note: Pictures may be of another Road Number.

Bar Mills Models 02020 HO Scale 60' Weathered Brick Sidewalk

In 1947, Plasticville® U.S.A. made history as the very first line of mass-produced, injection-molded scale plastic structure kits. Throughout the ensuing 75 years, Plasticville® has continued to delight both model railroaders and miniature...

In 1947, Plasticville® U.S.A. made history as the very first line of mass-produced, injection-molded scale plastic structure kits. Throughout the ensuing 75 years, Plasticville® has continued to delight both model railroaders and miniature...

In 1947, Plasticville® U.S.A. made history as the very first line of mass-produced, injection-molded scale plastic structure kits. Throughout the ensuing 75 years, Plasticville® has continued to delight both model railroaders and miniature...

Bar Mills Models 1140 HO Scale Chalky White's Pool Hall

The structure is based on a prototype, apparently it was some kind of a place to grab a bite to eat. The combination of clapboard & board & batten siding, along with the laser-cut “cedar shake” shingles & the complex looking...

“Majestic Hardware” is one of our earlier kits. Loaded with details the kit is available in all four major scales. Glancing over this part of the website you’ll be able to view just a few of the many photos that have been submitted to...

Whistlestop Junction was the first structure we ever produced to be made available through hobby shops. Available in both “N” & “HO” scales we wanted to make sure we were going to take a different approach to our models, not...

Don’t ask how we came up with the name “The Gravely Building”, we honestly don’t know. We just figured with apartments & an office on the upper floors and retailers on ground level it would make sense. The pre-printed windows,...

Benches Accessories Set contains a number of elegant benches for seating your model figures. Accessories Sets Everyone who values a realistic design of themed sceneries, can find a lot of ideas in the NOCH product range: from a icecream parlor to a...

Atlas Model Railroad 720 HO Scale Maywood Station Kit Tan W/ Brown Trim

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Broadway Limited Imports is proud to once again pioneer sound in HO! Our all-new Operating Water Tower is a faithful reproduction of the filling stations found on many water stops on Americas railroads. Water was an essential part of steam locomotive...

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front wall and porches only. Footprint: 2.375” x 1.0”

Rslaserkits 2129 HO Scale Plantation Store Façade

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today. This kit can be built either as a wood sided...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a paint. Footprint with Lean-To:5.5" x 7.375"

You used to find small factories like this in lots of towns sitting trackside. Harris Door was started after the first world war and survived the depression by adding more lines of wood working. When the building boom after the second world war hit, they...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included.Footprint: 2.375” x 2.375” x 5.5" tall. Note: Pictures may be of another Road Number.

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts. Footprint: 4" x 4".

Best burgers in town! Kit includes Northeastern Lap siding, Stip wood corners and bracing, Grandt line smoke stack details, Tichy train group door, 3 tab roofing, plus two laser cut picnic tables and signs for at least 4 businesses. Footprint: 1.75” x 2...

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes Tichy windows and doors, interior display cabinets plus a downloadable interior framing sheet by Clever models. Footprint: 4.125” x 4.375”.

Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig. Footprint: Dock 2.25" x 4.5". Building 2.25" x 2.25".

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum. Footprint: 3.5" x 3.25"

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Footprint: 2.5” x 4.0”

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop. Footprint: 3.25" x 4.15

False front stores like these were a staple on main streets all over North America. Footprint: 3.25" x 4.15"

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the...

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do not have access to a siding so they can unload rail...

Based on the Cherry Valley Lumber Car in the North-West.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's So this station can be used right through the transition period.Footprint: 5.5"...

This can serve as anything from a typical 1880s hotel up to a refurbished building for tourists in your area. (Note: N Scale model shown) Footprint: 4.5" x 7.0"

Based on those found in the pacific northwest from the early 1900s to the end of RR logging. Footprint: 1.625" x 5.125"

The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car and taken to the log camp. The kit is sized to fit on...

This kit is based on one used by the Manary Logging Co. in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side windows are laser cut as double hung and can be positioned in any...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.Footprint 2.3” x 2.3”. Note: Pictures may be of another Road...

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing.Footprint: 5.5 ” x 7.5”. Note: Pictures may be of another Road Number.

Typical 1-1/2 story frame house. These structures can be found anywhere.Footprint: 2.5" x 3.5". Note: Pictures may be of another Road Number.

Out house’s were an icon until the late 50 in most of rural America and still many are in use today. The kit includes 3 unique out houses with seats. Two single stall and one two stall. Use them behind the house or barn, or in your yard so your train...

For that special spot on the layout. See how many of your visitors notice this little gem.