Marklin

Prototype: German Federal Railroad (DB) 6-axle railroad rotary crane car with Ardelt system steam propulsion with a lifting capacity of 57 metric tons, with a crane tender car (converted from a type...

Dealer package assortment with 10 rolls each of red, brown, blue and yellow wire. Length of each roll 10 meters / 390 inches. Wire cross section 0.75 sq. mm / 0.0012 sq. in. (approximately 18 gauge)...

2.5 mm / 3/32" high. This is used as a pillar foundation. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height. From the simple...

This set enables easy control of the turntable with track indexing in the Digital system. The deck turns to the right/left in single steps or continuously. The set consists of an electronic control...

For cars 4131, 4132 and 4133. The kit consists of a pickup shoe and a ground spring, an adjustable light diffuser, 2 light sockets and 2 light bulbs.

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 56 mm / 2-7/32".

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a...

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

Very fine engraving. This is a kit for a single-track girder bridge with the look of steel. It has abutments, but no pillars. This cardstock kit is made of high quality precision laser-cut...

This unit is a current inverter for the 66630/66361 and 60041/60061 switched mode power packs to change the voltage from DC to AC or for connections with accessories using DC voltage. The AC voltage...

The Connect-6021 is for bidirectional connections between the former Marklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola...

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

Below-Baseboard Mechanism. Slow Motion Lens Movement. 2 aspects "Stop, Movement Prohibited" (Sh0), "Movement Prohibition Lifted" (Sh1). Movable lens, 1 light bulb, and below-baseboard mechanism...

For cars 42101, 42131, 4214, 42141, 42142 and 4229. The kit consists of a pickup shoe and a ground spring, a light diffuser, a light socket and a light bulb.

6 mm / 1/4" high. This pillar is for building ramps in 6 mm / 1/4" increments. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height...

Distribution device for connections for up to a maximum of 5 MS II to an output on the 60112 or 60113 digital connector box. An MS II Hub can be connected to both outputs on the connector box. Hence,...

1 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 14-3/16" / 30?. Outer curve: 30? with the parallel curve spacing of 77.5 mm / 3-1/16". Can be retrofitted with the 74492...

Length 1/1 = 30?.

Length 1/8 = 3? 45'.

R2 = 437.5 mm / 17-1/4" / 5.7? (extends turnouts to 30?).

Length 1/4 = 45 mm / 1-3/4".

Length 1/2 = 90 mm / 3-9/16".

Length 1/1 = 45?. Small radius for branch lines and industrial trackage. Cannot be used for long locomotives and cars.

Length 1/2 = 15?. Radius 424.6 mm / 16-3/4". Momentary contact with a locomotive/car pickup shoe.

Length 1/2 = 15?. Radius 360 mm / 14-3/16". Momentary contact with locomotive/car pickup shoe.

Length 35.1 mm / 1-3/8".

Length 1/2 = 15?.

1 left turnout with a manual hand lever. 188.3 mm / 7-13/32" / R2 = 437.5 mm / 17-1/4" / 24.3?. Can be retrofitted with the 74492 electric turnout mechanism.

Length 1/4 = 7? 30'.

Length 1/4 = 7? 30'.

Length 1/8 = 22.5 mm / 7/8".

R1 = 360 mm / 14-3/16" / 15?.

Length 3/4 = 22? 30'.

Length 1/6 = 30 mm / 1-3/16".

Length 1/2 = 15?.

Length 1/1 = 180 mm / 7-3/32" (standard length).

94.2 mm / 3-11/16". Content: 1 piece. This is an uncoupler track for manual and electric uncoupling. The electric operation can be done only with the 72752 control box and the cable included with...

1 right curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 14-3/16" / 30?. Outer curve: 30? with the parallel curve spacing of 77.5 mm / 3-1/16". Can be retrofitted with the 74492...

Length 1/1 = 30?.

R1 = 360 mm / 14-3/16" / 30?. Content: 3 pieces.

Track set consisting of 4 no. 24094 straight tracks (each 94.2 mm / 3-11/16" long) and 2 no. 24077 straight tracks (each 77.5 mm / 3-1/16" long).

R2 = 437.5 mm / 17-1/4" / 24.3? (turnout branch). Content: 1 piece.

171.7 mm / 6-3/4". Package quantity: 6 pieces.

R1 = 360 mm / 14-3/16" / 30?. Package quantity: 6 pieces.

Gauge: HO System: AC UPC/EAN: 4001883201993

Contents: 1 left turnout and 1 right turnout, as well as 2 sections of curved track to go with them (turnout curves), made of sturdy plastic just right for children.

77.5 mm / 3-1/16".

Length 70.8 mm / 2-13/16". Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

Radius R4 = 579.3 mm / 22-13/16". Curve 30?. Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

Gauge: HO System: AC UPC/EAN: 4001883201979

R2 = 437.5 mm / 17-1/4" / 15?. Momentary contact by means of locomotive/car pickup shoe.

Length 14? 26'. Complementary curve to the 22715 and 22716 turnout.

Length 236.1 mm / 9-5/16". This track is the same length as the length of the wide radius turnouts and wide angle crossings.

Length 1/1 = 30?.

Length 229.3 mm / 9". Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

R2 = 437.5 mm / 17-1/4" / 7.5?.

Control Box for 2.6 mm / 3/32" Diameter Plug Connections. This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings...

Red Plugs. Gauge: H0. A package comes with 10 pieces. These plugs and sockets cannot be used with the earlier versions (package, item no. 7130). The sockets will fit as plugs with some limitations...

Green Sockets. A package comes with 10 pieces. These sockets can be used with the standard plugs and sockets from the 71400 assortment. These plugs and sockets cannot be used with the earlier...

Curved Ramp. Gauge: H0. Radius 360 mm / 14-3/16". Curve 30 Degree. Width 64 mm / 1-5/16". For R1 radius C track curved sections. One ramp section is the same length as the 24130 track section.

Manufacturer: Mrklin Art.-No. 60882 EAN: 4001883608822 Gauge Neutral Delivery Date: 11/2014 s 88 DC Decoder This is a feedback module for current sensors on digitally controlled 2-rail layouts. This...

Maerklin Double Slip Switch. Gauge: Z. Length 112.8 mm / 4-7/16". 13 Degree. Radius 323 mm / 12-3/4".

Straight Adjustment Track. Gauge: Z. Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Electric Left Turnout. Gauge: Z. Length 110 mm / 4-3/8". 13 Degree. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They can...

Flex Track. Gauge: Z. Length 660 mm / 26'. The track can be made flexible by cutting the tie strip. Cut rails and tie strip to desired length and install new rail joiners (8954).

Marklin 8977 Z Scale 45 Degree Bridge Curved amp (1-Piece), 5-3/4-Inch\nThis ramp is used to build grades up to bridges. The ramp is the same radius as 8510. This ramp can also be used as a simple...

Electric Right Turnout. Gauge: Z. Length 110 mm / 4-3/8". 13 Degree. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They...

Manufacturer: Mrklin Art.-No. 8510 EAN: 4001883085104 Gauge Z 1:220 Power system DC Gebogenes Gleis Radius 145 mm. 45. Realistic detail with great add-on to any layout. Expand your layout to desired...

Manufacturer: Mrklin Art.-No. 8954 EAN: 4001883089546 Gauge Z 1:220 Power system DC Packung mit 10 Trenn- und 20 Verbindungslaschen zur elektrischen Trennung der Schienenstrnge bzw. leitenden...

This track is a basic section for parallel curves for Z Gauge layouts. 12 sections of this track make a circle. This track can be used to expand a Z Gauge layout. Marklin Z Gauge. High quality metal...