Marklin

Contents: 1 left turnout, 1 right turnout and 2 curved tracks made of stable, child-friendly plastic. Note: Pictures may be of another Road Number.

Prototype: German Federal Railroad (DB) 6-axle railroad rotary crane car with Ardelt system steam propulsion with a lifting capacity of 57 metric tons, with a crane tender car (converted from a type...

180 mm / 7-3/16". Contents: 6 pieces.

2.5 mm / 3/32" high. This is used as a pillar foundation. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height. From the simple...

For cars 4131, 4132 and 4133. The kit consists of a pickup shoe and a ground spring, an adjustable light diffuser, 2 light sockets and 2 light bulbs.

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 56 mm / 2-7/32".

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a...

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

Very fine engraving. This is a kit for a single-track girder bridge with the look of steel. It has abutments, but no pillars. This cardstock kit is made of high quality precision laser-cut...

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

Below-Baseboard Mechanism. Slow Motion Lens Movement. 2 aspects "Stop, Movement Prohibited" (Sh0), "Movement Prohibition Lifted" (Sh1). Movable lens, 1 light bulb, and below-baseboard mechanism...

For cars 42101, 42131, 4214, 42141, 42142 and 4229. The kit consists of a pickup shoe and a ground spring, a light diffuser, a light socket and a light bulb.

6 mm / 1/4" high. This pillar is for building ramps in 6 mm / 1/4" increments. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height...

1 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 14-3/16" / 30?. Outer curve: 30? with the parallel curve spacing of 77.5 mm / 3-1/16". Can be retrofitted with the 74492...

Length 1/1 = 30?.

Length 1/8 = 3? 45'.

R2 = 437.5 mm / 17-1/4" / 5.7? (extends turnouts to 30?).

Length 1/4 = 45 mm / 1-3/4".

Length 1/2 = 90 mm / 3-9/16".

Length 1/1 = 45?. Small radius for branch lines and industrial trackage. Cannot be used for long locomotives and cars.

Length 1/2 = 15?. Radius 424.6 mm / 16-3/4". Momentary contact with a locomotive/car pickup shoe.

Length 1/2 = 15?. Radius 360 mm / 14-3/16". Momentary contact with locomotive/car pickup shoe.

Length 35.1 mm / 1-3/8".

Length 1/2 = 15?.

1 left turnout with a manual hand lever. 188.3 mm / 7-13/32" / R2 = 437.5 mm / 17-1/4" / 24.3?. Can be retrofitted with the 74492 electric turnout mechanism.

Length 1/4 = 7? 30'.

Length 1/4 = 7? 30'.

Length 1/8 = 22.5 mm / 7/8".

R1 = 360 mm / 14-3/16" / 15?.

Length 3/4 = 22? 30'.

Length 1/6 = 30 mm / 1-3/16".

Length 1/2 = 15?.

Length 1/1 = 180 mm / 7-3/32" (standard length).

94.2 mm / 3-11/16". Content: 1 piece. This is an uncoupler track for manual and electric uncoupling. The electric operation can be done only with the 72752 control box and the cable included with...

1 right curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 14-3/16" / 30?. Outer curve: 30? with the parallel curve spacing of 77.5 mm / 3-1/16". Can be retrofitted with the 74492...

Length 1/1 = 30?.

R1 = 360 mm / 14-3/16" / 30?. Content: 3 pieces.

Track set consisting of 4 no. 24094 straight tracks (each 94.2 mm / 3-11/16" long) and 2 no. 24077 straight tracks (each 77.5 mm / 3-1/16" long).

R2 = 437.5 mm / 17-1/4" / 24.3? (turnout branch). Content: 1 piece.

171.7 mm / 6-3/4". Package quantity: 6 pieces.

R1 = 360 mm / 14-3/16" / 30?. Package quantity: 6 pieces.

Gauge: HO System: AC UPC/EAN: 4001883201993

Contents: 1 left turnout and 1 right turnout, as well as 2 sections of curved track to go with them (turnout curves), made of sturdy plastic just right for children.

77.5 mm / 3-1/16".

Length 70.8 mm / 2-13/16". Removable roadbed slope. This track is used on both branches of the wide radius turnouts and wide angle crossings.

Radius R4 = 579.3 mm / 22-13/16". Curve 30?. Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

Gauge: HO System: AC UPC/EAN: 4001883201979

R2 = 437.5 mm / 17-1/4" / 15?. Momentary contact by means of locomotive/car pickup shoe.

Length 14? 26'. Complementary curve to the 22715 and 22716 turnout.

Length 236.1 mm / 9-5/16". This track is the same length as the length of the wide radius turnouts and wide angle crossings.

Length 1/1 = 30?.

Length 229.3 mm / 9". Serves as the complement to the length of the complementary curve on the wide radius turnouts and wide angle crossings.

R2 = 437.5 mm / 17-1/4" / 7.5?.

Detachable hand lever included. Fixed frog and guard rails. Length of the straight side 225 mm / 8-7/8". Turnout branch 14° 26'. Branch radius 902.4 mm / 35-1/2". A 75491 electric turnout mechanism...

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts. Ho Scale.

Length 236.1 mm / 9-5/16". Branch track radius 1,114.6 mm / 43-7/8". Turnout curve 12.1°. 10° metal frog. 2 sections 24701 track required at the ends of the turnout, suitable roadbed slope piece...

Inner curve: R1 = 360 mm / 14-3/16" / 30°. Outer curve: 30° in the parallel curve spacing of 77.5 mm / 3-1/16". Manual hand lever included. Can be retrofitted with the 74491 turnout mechanism, 74461...

Length 236.1 mm / 9-5/16". Crossing angle 12.1°. Crossing legs electrically isolated from each other. 4 sections of 24071 track are required at the ends of the crossing (not included with 24740). 2...

R1 = 360 mm / 14-3/16" / 15°. Momentary contact by means of locomotive/car pickup shoe. HO Scale.

Crossing angle 14° 26'. Track length 225 mm / 8-7/8". HO Scale.

Length 2 x 1/2 = 2 x 90 mm / 3-9/16". Continuous contact through wheel sets on locomotives / cars. The two track sections have an insulated rail section for track occupation feedback signal when a...

Length 1/2 = 90 mm / 3-9/16". Momentary contact with a locomotive/car pickup shoe.

Crossing angle 45°. Track length 90 mm / 3-9/16". HO Scale.

Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases. Length 16.5 mm / 5/8". 10 pieces in a package.

This track is a basic section for parallel curves for Z Gauge layouts. 8 sections of this track make a circle. This track can be used to expand a Z Gauge layout. Marklin Z Gauge. High quality metal...

Marklin E Extension Set with Electric Turnouts Z scale

Ger.Gleis 220 mm

Manufacturer: Mrklin Art.-No. 59076 EAN: 4001883590769 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gebogenes Gleis Radius 1550 mm. 22,5(ehem. Hbner H1071)

Manufacturer: Mrklin Art.-No. 59051 EAN: 4001883590516 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gerades Gleis Lnge 59,5mm (ehem. Hbner H1026)

Manufacturer: Mrklin Art.-No. 24772 EAN: 4001883247724 Gauge H0 1:87 Power system AC Delivery Date: Q2/2016 Right Curved Turnout. R3 = 515 mm / 20-1/4" / 30. Outer curve: 30with a parallel curve...

Manufacturer: Mrklin Art.-No. 59074 EAN: 4001883590745 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gebogenes Gleis Radius 1550 mm. 15(ehem. Hbner H1100)

Manufacturer: Mrklin Art.-No. 24995 EAN: 4001883249957 Gauge H0 1:87 Power system AC Product Line: Hobby C-Gleis Package content: 2 Length: 94,2 mm Delivery Date: 2000 Contact Track Set. Two straight...

Curved Track. Gauge: Z. Complementary curve for turnouts. 13 Degree. Radius 490 mm / 19-1/4". Same curve as the branch on the 8562 L, 8563 R, 8565 L and 8566 R turnouts.

Current-Conducting Couplers. Gauge: H0. Operating close coupler with single-pole electrical connection for lighted passenger cars. This coupler can be used for cars with the lengths 26.4 cm /...

Curved Ramp. Gauge: H0. Radius 360 mm / 14-3/16". Curve 30 Degree. Width 64 mm / 1-5/16". For R1 radius C track curved sections. One ramp section is the same length as the 24130 track section.

Manufacturer: Mrklin Art.-No. 59057 EAN: 4001883590578 Gauge I 1:32 Power system DC Delivery Date: 3Q/2008 Gerades Gleis Lnge 200mm (ehem. Hbner H1004)

Made in Germany.

Manufacturer: Mrklin Art.-No. 59078 EAN: 4001883590783 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gebogenes Gleis Radius 2321 mm. 10(ehem. Hbner H1008)

Maerklin Double Slip Switch. Gauge: Z. Length 112.8 mm / 4-7/16". 13 Degree. Radius 323 mm / 12-3/4".

Straight Adjustment Track. Gauge: Z. Length 112.8 mm / 4-7/16". Same length as the straight length of 8559 crossing and 8560 double slip switch.

Electric Left Turnout. Gauge: Z. Length 110 mm / 4-3/8". 13 Degree. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and manual hand levers. They can...

Manufacturer: Mrklin Art.-No. 59059 EAN: 4001883590592 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gerades Gleis Lnge 600mm (ehem. Hbner H1006)

Marklin 85941 FLEX TRACK W/CONCRETE TIE

Manufacturer: Mrklin Art.-No. 59230 EAN: 4001883592305 Gauge I 1:32 Power system DC Gebogenes Gleis Radius 760,8 mm. 30. Das Gleis 59230 dient als Parallelkreis zum gebogenen Gleis 5922. Der...

Manufacturer: M rklin Art.-No. 8194 EAN: 4001883081946 Gauge Z 1:220 Power system DC Yard Track Set Contents: 10 straight tracks, 1 double slip switch, 2 electric turnouts, 4 track bumpers, a control...

Flex Track. Gauge: Z. Length 660 mm / 26'. The track can be made flexible by cutting the tie strip. Cut rails and tie strip to desired length and install new rail joiners (8954).

Marklin My World Curved Electric Turnout, 4-3/8-Inch, Left Hand

Marklin 59079 3URNOUT MECHANISM

Manufacturer: Mrklin Art.-No. 59058 EAN: 4001883590585 Gauge I 1:32 Power system DC Delivery Date: 3Q/2008 Gerades Gleis Lnge 300 mm. (ehem. Hbner H1005)

Made in Germany.

Manufacturer: Mrklin Art.-No. 59072 EAN: 4001883590721 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gebogenes Gleis Radius 1176 mm. 22,5(ehem. Hbner H1040-2)

Made in Germany.

Manufacturer: Mrklin Art.-No. 59052 EAN: 4001883590523 Gauge I 1:32 Power system DC Delivery Date: Q3/2008 Gerades Gleis Lnge 79 mm. (ehem. Hbner H1102)

Straight Adjustment Track. Gauge: Z. Length 108.6 mm / 4-1/4". For adjusting length on the 8559 crossing and 8560 double slip switch.