Land

About Krupp Protze 1ton (6X4) Towing Truck w/3.7cm PakPopularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both...

T-55 production began in 1958, as tensions between western countries and the Soviet Union grew. It was easy to produce and featured an oblique front hull wall, a compact hull and a semi-spherical turret to limit vulnerability. The T-55 was also well...

During WWII, the British army used various small tracked personnel carriers such as the Universal Carrier Mk.II, which first appeared in 1942. Tamiya's plastic assembly model kit accurately reproduces this vehicle's compact design, suspension, and...

The Panzerkampfwagen VI was German's most important tank during WWII. It remained in mass production throughout the war and, with some 8,000 units produced, it represented more than one-third of Germany's entire wartime tank production. As the backbone...

For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that. This precision plastic model depicts the Ausf.J variant of the rustic tank, which...

In the final stages of WWII, the Sturmtiger made its appearance on the battlefield. Based on the Tiger I hull, it came armed with a giant 38cm rocket launcher. The distinctive form of the Sturmtiger with its thick and short gun is now faithfully...

A Tough Nut to CrackThe King Tiger was the final mass produced German tank of WWII, coming as it did in 1944. With armor 150mm thick on the front and 80mm on the sides, its hull was a tough nut to crack, while firepower was provided by a new, upgraded...

Still operational in the present day despite its having been introduced back in 1969, the Marder has proved a resilient and adaptable vehicle. This precision plastic model assembly kit recreates the 1977 vintage Marder 1A2 with MILAN anti-tank missile...

At the time of its introduction in 1942, the German Tiger I was the most powerful and sophisticated tank available anywhere in the world, and is still considered a weaponry masterpiece of that era. Most of the Tiger I's were produced by Henschel, a heavy...

The M4 Sherman was a mainstay of Allied armor units throughout WWII and over 50,000 examples were produced. Many variants were created to meet specific battlefield requirements and among these was the M4A3E2, known to infantrymen as the "Jumbo," which...

This is a 1/35 scale plastic model assembly kit recreating the 75mm gun-equipped Sturmgeschütz IV deployed by Nazi Germany in WWII. ?The powerful, form of the vehicle is captured in style. ?Features optional hull front cement block for armor...

The 7.5 cm anti-tank gun was to become the main and typical anti-tank weapon of the German Army. It was often towed by the 3-ton trator Sdkfz 11. With the progress of the war situation, the gun combined with the chassis of fighting vehicles including the...

Power up your masterpiece model or diorama with another new set of German WWII figures crafted using the latest scanning and modeling techniques. The figures in this kit depict Wehrmacht infantry in uniforms of the Mid-WWII period. This set also includes...

This model kit recreates the British Main Battle Tank Challenger 2 in compact 1/48 scale. The Challenger 2 featured an engine based on that of the Challenger 1 (Britain’s main battle tank during the Gulf War), double-pin, double-block tracks and...

This is a highly detailed model of the WWII German tank destroyer Nashorn. The German Army developed self-propelled anti-tank guns in order to counter the overpowering Russian T-34 and KV tanks, and the Nashorn had particularly overwhelming power among...

This is a 1/48 scale plastic assembly model of the British Matilda previously available in 1/35 scale. Historical background: The Matilda was developed as a heavily armored infantry tank and was one of the British Army"s main tanks in North Africa during...

The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2, which was put into production in December 1943 during the latter half of WWII, had a long powerful 122mm gun and superior armor. From August, 1944 the hatch on the front...

The First Japanese BulldozerThe Komatsu G40 was produced for the Japanese Navy during WWII and had the distinction of being Japan's first ever domestically-produced bulldozer. It was developed as a means to speed up airfield construction, which had up to...

In the space of just 2 years, Tamiya has established the 1/48MM Series and the industry hasfollowed our lead as acceptance of this scale continues to expand. As we head closer towardsthe milestone of our 50th 1/48 MM model kit, Tamiya is proud to...

Tamiya announces the release of the up-armored KV-1B in our ever-growing 1/48 MM Series.Display it with the previously released KV-1 to show the differences between the two, line it upwith our other Russian vehicles like the T-34 and GAZ-67B, or pit it...

Designed by Dr. Ferdinand Porsche, the amphibious Schwimmwagen was used by the German land forces, paratroopers and engineering corps during WWII, fulfilling both reconnaissance and liaison duties. Capable of both 2 and 4 wheel drive, the Schwimmwagen...

This product is the same as Item 35281 1/35 German Sturmgeschtz III Ausf. B assembly kit. It is coupled with precision-made Photo-Etched Parts made by the Polish hobby product company ABER, enabling an even higher level of realism to advanced model...

This item is the same as Item 35216 1/35 German Tiger I Early Production assembly kit. It is coupled with a metal Gun Barrel and Photo-Etched Parts made by the Polish hobby product company ABER. These included detail parts enable advanced modelers to...

One of the last tanks to be produced by the Japanese military, during WWII, was the Type 3 Chi-Nu. This vehicle was developed in May of 1944 as an improved version of the Type 97 Chi-Ha line of medium tanks. The word "Chi" stands for the word "medium...

During WWII, the primary tank used by the United, was the Sherman M4. The tank was provided to Russia via the Lend-Lease Act, which supplied the United Kingdom, the Soviet Union, China, France and other allied nations with weapons and military vehicles...

Full drive train assembly complete with engine transmission, differential housing and suspension units. > The main tires are hollow rubber with very good tread pattern > Wheel hubs are in great details > The windshield and side windows are mad

Product number: 84545 product name: German FLAK 40 12.8cm anti-aircraft gun barcode: 6939319245458 Product ratio: 1:35 product type: Plastic Model Armor Kit Model size: Length: 353.3mm Width: 90.4mm Total number of parts: ...

Product number: 84404 product name: German Tank Grenadier 1 barcode: 6939319244048 Product ratio: 1:35 product type: Plastic Military Figure Kit Announcement date: 2019-07

The Leopard 1 is a main battle tank produced in Germany . It began production in 1965 and is the first tank developed by Germany since World War II . A total of Leopard 1 has been put into the armies of 11 countries on 4 continents around the world. Due...

The M4 medium tank equipped with Ford's GAAV8 water-cooled gasoline engine was named M4A3. Because of its better performance than other M4s, it has the highest evaluation in the Army, and almost all M4A3s are reserved for personal use. The M4A3 chariot...

The kit consists of 219 parts in light grey plastic in 7pcs sprues, for the transporter set, 2 sprues with 26 parts in light grey plastic.

The "Black Panther" was a medium tank developed by Nazi Germany during World War II and was used from mid- 1943 until the end of the European War in 1945 . "Black Panther" has excellent firepower, mobility and good protection performance, and was also...

Detailed multi-directional slide-molded cab > Full drive train assembly complete with engine transmission, differential housing and suspension units. > The main tires are hollow rubber with very good tread pattern > Wheel hubs are in great deta

The "Black Panther" was a medium tank developed by Nazi Germany during World War II and was used from mid-1943 until the end of the European War in 1945. "Black Panther" has excellent firepower, maneuverability and good protection performance. It was...

Product number: 84547 product name: IDF PUMA combat engineering vehicle barcode: 6939319245472 Product ratio: 1:35 product type: Plastic Model Armor Kit Model size: Length: 229.4mm Width: 111.1mm Total number of parts: ...

The ZTZ99 is the most advanced main battle tank (MBT) of the PLA. The ZTZ99 provides a significant improvement in firepower, mobility, and protection compared to older Chinese-made tanks. Some of the ZTZ 99 ' s technologies have been used to upgrade the...

Product number: 84401 product name: German Tank Corps (Normandy 1944) barcode: 6939319244017 Product ratio: 1:35 product type: Plastic Military Figure Kit Announcement date: 2019-04

Full drive train assembly complete with engine transmission, differential housing and suspension units. > The main tires are hollow rubber with very good tread pattern > Wheel hubs are in great details > The windshield and side windows are mad

The K51 "Defense Line" SSC-3 coastal defense missile system has been widely exported to other countries. The launch vehicle of 3P51 is based on the MAZ-543M 8?8 chassis and uses the KT-161 dual-mounted launcher. Two radar structures exist. Early versions...

Product number: 84416 product name: German Infantry "Firestop" barcode: 6939319244161 Product ratio: 1:35 product type: Plastic Military Figure Kit Announcement date: 2021-12

Product number: 84413 product name: German soldiers barcode: 6939319244130 Product ratio: 1:35 product type: Plastic Military Figure Kit Announcement date: 2019-05

The Sd.kfz. 222 series of armored vehicles, equipped with the German Army from 1935, did not stop production until 1944. The armored vehicle uses Horch's 3.5-liter gasoline engine with an output of 67 kW, a road speed of 80 km/h, an off-road speed of 40...

The URAL-4320 6?6 all-terrain utility truck is produced for the Russian Army by the automobile factory in Ural, Russia. It is still in production today since it was commissioned in 1976. The wheels of the URAL-4320 are designed so that it can transport...

The Leopard 1 is a main battle tank produced in Germany. It began production in 1965 and is the first tank developed by Germany since World War II. A total of Leopard 1 has been put into the armies of 11 countries on 4 continents around the world . Due...

The SS-23 "Spider" tactical ballistic missile ("Oka" missile) was created by the Soviet Union after the Cold War to replace the outdated "Scud" ballistic missile. The development began in 1977, the first flight test was carried out in 1978, it was...

The M113 is one of the vehicles most widely used in non-communist countries of the world and is showing activity as transport for infantrymen of free nations. Among the important features of the M113 are smallness, lightness, and therefore easiness to...

The M42 Duster was an anti-aircraft vehicle used in conjunction with tank units, equipped with a pair of 40mm cannons on an open-top turret, and powered by a 500hp engine that let it achieve speeds of up to 70km/h. It was accepted into service with the U...

This model kit set pairs up the Type 1 self-propelled gun (Item 35331) with Japanese model maker Fine Molds’ Type 94 Kurogane 4x4 scout car, in what promises to be a great value diorama in a box! The Type 1 was a modified tank with a 75mm field...

This scale model assembly kit recreates the Japan Ground Self Defense Force (JGSDF) Type 16, which reached units beginning in 2017. An 8-wheel vehicle, the JGSDF classify it as a Maneuver Combat Vehicle (MCV), a highly mobile and well-armed vehicle...

This model kit set pairs the classic model of the JGSDF reconnaissance motorcycle (Item 35245) with Japanese model maker Fine Molds’ high mobility vehicle, in what promises to be a great value diorama in a box! Motorcycles are an important part of...

This 1/48 scale military miniature model kit recreates the Panther Ausf.D, the very first variant of the highly-rated German tank. Developed partly in answer to the Soviet T-34, the Panther offered a complete performance package, with an imposing L/70 7...

This Military Collection series product takes the modern ICM P204(f) armored railway vehicle kit and pairs it with Tamiya contents such as two figures, accessories, and decals. The subject is the P204(f), which was an armored railway vehicle that German...

An Unsung HeroThe 2 1/2 ton cargo truck supported the lifeline of the Allied armies in WWII and Korea, carrying supplies and soldiers to the front. Over 800,000 were built during WWII, with many variations produced for various tasks. The most common...

Of the many variables that take affect any conflict, supply and mobility are the most pressing.Germany realized this very early and developed a number of vehicles for this purpose,including the Sd.Kfz 251 half-track. This machine became the centerpiece...

Italeri 0404 1:35 TELEGRAPH POLES

This is a 1:35 scale set of Jerry Cans from Italeri.

Tamiya 35108 1/35 RUSS T-62A TANK

Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World." Now Tamiya is offering more than 300 different...

Tamiya 32549 Steyr Type 1500a/01 1:48 Plastic Kit

Minefields were a constant hazard for invading U.S. forces during the Persian Gulf War of 1991; chief among their countermeasures was the trusty M1A1 tank fitted with a mine plow. This plastic model assembly kit expertly recreates such an M1A1 Abrams...

Tamiya 35044 1/35 BRIT.25 PNDR GN/QUAD

Tamiya 35154 1/35 BRIT MBT CHLLG 1MK 3

Tamiya 35050 1/35 GER 8 TON 1/2 TRK7/1

Taliya 1/48 Mhlitary Mintature Sgries Nl.90 Gtound Selx-Defense Forcn Koratsu LAP Modeb 32590

Tamiya 35207 1/35 RUSS ARMY ASSLT INFT

Tamiya 35096 1/35 GER PANZERKAMPFWAGIV

Tamiya 32578 1/48 GERMAN MOTORCYC/SDCR

Tamiya 35149 1:35 RUSS. T34/76 CHTZ

Tamiya 35127 1/35 ISRAELI MERKAVA MBT

Tamiya Models 10HP British Light Utility Car (1/35 Scale)

SPECIFICATIONS \nGALLERY \n1/16 US ABRAMS M1A2 \nDESCRIPTION \nThis Large-Scale 1/16 model recreates the current stalwart of U.S. forces, the M1A2 Abrams. The M1 Abrams has been around since the early 1980s, receiving constant upgrades to ensure that it...

Austin 10 'Tilly' - WWII era 4 x 2 light utility vehicle. Kit has detailed curbside chassis, cab and bed interiors, separately molded tailgate and on-vehicle equipment, optional cloth texture cargo cover and seated driver figure. Decals and painting...

Tamiya 35164 1:35 GER KING TIGER W/PRD

Faithfully modeling a heavy and unique style equipped with a huge rocket cannon at 1/48 scale. 38 cm rocket cannon reproduces the lifeline pattern inside. The armor plate of the fighting room adopts the part division conscious of the combination of real...

Tamiya 35064 1/35 W GER LEOPRD MEDTANK

Tamiya 35068 1/35 BRIT CHIEFTN MK5 TNK

Assemble a German Kettenkraftrad & an Infantry Cart or a Goliath Demolition Vehicle with this 1:48 Scale Plastic Model Kit from the Tamiya Military Miniature Vehicle Series Suitable for Ages 10 & Older. FEATURES: Highly detailed German model replicas in...

Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World." Now Tamiya is offering more than 300 different...

Tamiya 35190 1/35 US MED TNK M4 SHERMN

Tamiya 32501 1:48 GERMAN KUBELWAGEN

Tamiya 1/35 Panzer Kampfwagen II TAM35009

Tamiya 35120 1/35 US M48A3 PATTON

Academy 13314 1:35 TIGER 1 LATE VERSION

This scale model recreates the SS-100, which was a veritable workhorse for German forces during WWII. Powered by a 100hp 8,553cc diesel, it was based upon a civilian vehicle design and could pull loads of up to 20 tons. The SS-100 was put to work towing...

Israel Defense Force M4A1 Sherman tank upgraded with HVVS suspension and armed with a powerful French 105mm CN-105-F1 gun. Kit includes crisp exterior features, cast texture upper hull and turret, well rendered running gear (multipart bogies, sprockets...

Tamiya 35091 1/35 Scale German 2cm Flakvierling 38 Kit