Phoenix Model Buildings

The fence is a scale 6 foot tall Comes with with laser cut support framing, 4 - 24 ft. sections of fence and a 4 ft gate section for a total of 100 scale feet of fencing. Has boards on both sides of...

You get 12 - 24 foot wood trusses, 12 sheets of T-111 siding and 16sheets of plywood, two 16 ft ladders plus as an added bonus 3 saw horses.

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front...

Rslaserkits 2129 HO Scale Plantation Store Façade

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a...

You used to find small factories like this in lots of towns sitting trackside. Harris Door was started after the first world war and survived the depression by adding more lines of wood working. When...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut...

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included.Footprint: 2.375” x 2.375” x 5.5" tall. Note: Pictures may be of another...

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts. Footprint: 4" x 4".

Best burgers in town! Kit includes Northeastern Lap siding, Stip wood corners and bracing, Grandt line smoke stack details, Tichy train group door, 3 tab roofing, plus two laser cut picnic tables and...

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes Tichy windows and doors, interior display cabinets plus a downloadable interior...

Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig. Footprint: Dock 2.25" x...

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum...

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Footprint: 2.5” x 4.0”

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing...

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do...

Based on the Cherry Valley Lumber Car in the North-West.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's So this station can be...

This can serve as anything from a typical 1880s hotel up to a refurbished building for tourists in your area. (Note: N Scale model shown) Footprint: 4.5" x 7.0"

Based on those found in the pacific northwest from the early 1900s to the end of RR logging. Footprint: 1.625" x 5.125"

The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car...

This kit is based on one used by the Manary Logging Co. in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side windows are...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing.Footprint: 5.5 ” x 7.5”. Note: Pictures may be of another Road Number.

Typical 1-1/2 story frame house. These structures can be found anywhere.Footprint: 2.5" x 3.5". Note: Pictures may be of another Road Number.

Out house’s were an icon until the late 50 in most of rural America and still many are in use today. The kit includes 3 unique out houses with seats. Two single stall and one two stall. Use them...

For that special spot on the layout. See how many of your visitors notice this little gem.

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 3.7" x 5.0" Note: Pictures may be of...

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown, with a footprint of 3 1/2 by 5. The saloon is named for the husband of one of my co-workers that has...

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines...

This charming Victorian structure will be right at home on your layout. This kit has been designed to accurately represent the prototype structure in HO scale. Builds either early or late version...

Includes Lean-to extension, Several Window, door and chimney options plus 12 wood barrels and 10 pallets. Laser Cut Accuracy - Precise Fit - Easy Assembly.Footprint: Including Steps 7.5” x 4...