LGB

These track contacts fit older LGB 2040-series locos (built 1991 or earlier). LGB trains and LGB accessories, are made to a very high standard. They are made to operate indoors or outdoors.

This is a 82 mm / 3-1/4" long straight section of track.

The rerailer makes it very easy to place your LGB models on the track: Just place it on a section of LGB straight track and push the model onto the track.

Insulated rail joiners allow you to set up isolated block sections of track. To do this the metal rail joiners must be replaced by these sturdy plastic rail joiners. A package has 4 pieces.

DURANGO AND SILVERTON "YANKEE GIRL" WARNING: CHOKING HAZARD - SMALL PARTS! NOT INTENDED FOR CHILDREN UNDER 3.

5 volt smoke insert for locomotives with voltage limiting circuitry. LGB trains and LGB accessories, are made to a very high standard. They are made to operate indoors or outdoors.

Locomotive controller for use with #51090. For use in a dry enviornment only. Can be connected to a garden railway.

Straight track: 440 mm / 17-5/16“. Branch: right, R3, 22.5°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its...

75 mm / 2-15/16“ long straight section of track. This equals 1/4 of the LGB 10000 track.

This set allows you to set up a trouble-free reverse loop circuit for analog operation without additional wiring. The set contains an LGB 10152 separation section of track and a special section of...

This track bumper with a lighted lantern can be mounted on straight sections of track.

The rack rail holders are used to mount the rack rails (LGB 10210). The holders snap into place between the ties of most LGB track sections. These holders are easy to install without the need to...

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations. This classic...

The radius R1, 15° curved track equals half of the R1, 30° curved track (LGB 11000).

You can enlarge your LGB starter set circle into an oval with a passing track. Two trains can pass, one train can park, cars can be switched or a locomotive can be moved from one end of the train to...

Straight side: 300 mm / 11-13/16“. Branch: right, R1, 30°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its...

41 mm / 1-5/8“ long straight section of track for filling small gaps in the track.

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electrical...

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two...

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

This double-pole, double-throw switch can be installed on the LGB turnout mechanism (LGB 12010). It can be used for all kinds of automatic controls for trains, signals, and lighting circuits...

These wire holders help keep your wiring manageable. The holder attaches to the side of a section of LGB track. The wires can then be laid easily in the opening.

The curved track in radius R1 is one of the basic pieces in the LGB track assortment. 12 sections of R1, 30° track make a circle (360°).

The curved track in radius R5, 7.5°, is half as long as the curved section of track in radius R5, 15° (LGB 18000).

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. Radius R1, 15° curved track.

This is a model of a Rhaetian Railroad turnout lantern. This lantern can be mounted on all LGB electric turnouts and on the LGB turnout mechanism (L12010). It is operated with 18 volts.

LGB turnouts are designed to be sturdy for years of outdoor use. Straight side: 300 mm / 11-13/16“. Branch: right, R1, 30°. The turnout mechanism can be installed on the right or the left side of the...

You can enlarge your LGB starter set circle into an oval with a siding for switching operations and train storage. The sturdy storage box includes: 1 - 12000 manual right-hand switch, 6 - 10000...

This electric turnout mechanism is easy to install on all LGB turnouts. You can even control your trains automatically by combining this mechanism with the LGB auxiliary switch (LGB 12070) and other...