Buildings & Structures

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today. This kit can be built either as a wood sided...

A saloon built in Virginia City, Montana about 1875. It was constructed primarily of rough 6x12 timbers, laid up log cabin style. The finished and ornamented false front provided a sharp contrast to the rough cabin construction.Foot Print: 1.25" x 2...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings.Foot Print: 2.25" x 2.625" Note: Pictures may be of another Road Number.

Based on a store in Jefferson Oregon.Footprint: 1 1/4” x 2” Note: Pictures may be of another Road Number.

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 1 3/8" x 2 1/8". Note: Pictures may be of another Road Number.

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.Footprint: 1.75" x 2.25". Note: Pictures may be of another Road Number.

Based on the Cherry Valley Lumber Car in the North-West.Footprint: 0.6" x 2.85" Note: Pictures may be of another Road Number.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be used right through the transition period.Footprint...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines. Note: Pictures may be of another Road Number.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.Footprint 1.25” x 1.25”. Note: Pictures may be of another Road...

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.Footprint 1.75” x 3.25”. Note: Pictures may be of another Road Number.

Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed. With a foot print of 2" by 6" it has plenty of storage room. Laser kit stud back and end wall framing with plywood sheeting for the exterior walls and enough to sheet the inside...

One of the 5 structures in our new complex of kits. With a foot print of 5" by 5" this makes for a main industry. It includes 2 different roof signs, laser cut plywood walls, laser cut widows and trim, plus glazing, loading dock stairs and foundation...

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 2.0" x 2.7". Note: Pictures may be of another Road Number.

A nice side factory or warehouse for your layout.Foot print is 11 1/4 x 3 inches and includes Tichy windows and doors plus pre-colored roofing Note: Pictures may be of another Road Number.

This is a 100 ft long cover bridge and is like many bridge used around the country. The kit includes stone easer cut abutments which allow for 1 7/8 inch clearance under the bridge. Designed to be a simple build and no cutting involved other then what is...

A small Victorian station that would look great on any layout. Mudville the famous home of the Mudville 9 and Casey at the Bat. This kit is based on a design and O scale build by Dave Rouse and we have to give him a big thanks for letting us offer it to...

Included interior details as shown plus 2 cars. Show room interior has parts counter and 4 parts racks 2 LED lights , Street sign and base, 2 fuel pumps and a sign sheet with 2 different names Steve’s and Acme Auto Repair.Foot print without fuel...

This kit is based on the water tank at Green Island on the Delaware & Hudson RR

A prefect small building for that down town street or back road. Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light.Foot print with sidewalk 1 3/4 x 2 3/4 inches

Asher Supply is a small Stone building that has many uses. Could be a track side freight house or warehouse. Or a in town contractors supply house.Footprint: 2 3/8 by 6 1/2 inches.

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the 1920’s it was the home of Harter Silos. Harter had the...

A brick farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys.Footprint: 2-1/2” by 3”.

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts.Footprint: 2.25" x 2.25" x 4" tall.

This shed is based on a speeder shed on the late John Allen's G&D layout. Kit includes, fuel oil tank code 40 weathered rail for the speeder track strip wood for the rail in fill decks.Speeder also included with kit.Footprint: 1” by 2 1/2”

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house.Footprint: 1 1/4” by 2 1/4”

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts plus two picnic table kits and a sign sheet with 5...

The freight house at the crossing of the Mono and Nickel Plate Railroads at Linden Indiana.Footprint: 3 3/8” x 4 1/4“

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum.Footprint: 1 13/16" x 3 1/8th"

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the...

This little shop is typical of businesses in small towns across the country. Some are still standing today, they have been renovated for a variety of uses.Footprint: 1.60 x 2.25 inches

This could either be a thriving steam era hotel or a refurbished building for tourists in your area.Footprint: 2.50" x 3.75".

Based on those found in the pacific northwest from the early 1900s to the end of RR logging.Footprint: 0.6" x 2.85"

Base on many of the newer log houses and lodges being built all over the country.Footprint 3.0” x 4.0”.

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical...

The perfect station for any railroad. This kit has been designed to accurately represent the prototype structure in N scale. Builds either early or late version. More than 230 pieces of precision laser cut wood, + shingle sheets. Roof panels have scribed...