NCE

Product Details4 pin connector plug for use with PH-Pro System Box, Power Pro, etc...This connector is for AC power in from wall transformer ( 2 pins on the left) and Track power out ( 2 pins on the...

Product DetailsPart Number: 524-601Navy blue polo shirt with NCE logo embroidered above pocket. Cotton/polyester blend (50/50). Sizes run normal (not larger or smaller than normal)

Product Details2 pin connector plug for use with Power Cab, SB5, PH-Pro System Box, etc...

NCE: 05240033 UPC: 00816757011493 Continuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with UK power cord

NCE: 5240181Dimensions: 2.6 x 0.350 x .079 inches 66 x 8.9 x 2.0 mmUPC: 816757012025Direct plug in to Atlas GP39-2, Intermountain SD40-2 plus other plug-and-play N Scale locosDimensions: 2.6 x 0.350...

UPC: 816757011004Easy programming with no jumpers. On board LED display. Control for 8 Tortoise switch machines. Remembers the position of switch during power outages. Supports the full range of DCC...

24 AWG Red/White Stranded Twisted Pair Hook-Up Wire 100 Foot Spool.

Part Number5240247 24 AWG Black/White Stranded Twisted Pair Hook-Up Wire 100 foot Spool.

Part Number5240178 Dimensions0.595 x 0.390 – 15mm x 10mm NCE5240178 UPC816757011998 Dimensions: 0.595 x 0.390 – 15mm x 10mm Direct plug in to locos equipped with Next18 (NEM-662) socket Features of...

NCE 5240234 UTP-CAT5 PANEL

Blue Ultraflex wire, 32AWG, 10 feet.

Part Number5240292 NCEEuro2-5 2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG

Green Ultraflex wire, 32AWG, 10 feet.

Part Number05240149 UPC816757011059 Dimensions: 2.14" x 0.640” x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or...

Part Number5240297 NCEEuro12-2 12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.

Part Number05240146 UPC816757010977 Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC “Quick Plug” with small no halt module installed. Caution: Not for use with more than 15...

Warm white LED, 3mm, qty 20

White Ultraflex wire, 32AWG, 10 feet.

Part Number05240132 Dimensions.34 x .7 x .12in. 8.6 x 18 x 3.2mm UPC816757010533 Generic, Thin, 1 Amp 4 Function w/8 Pin NMRA Plug

Part Number5240310 NCE5240310 5 pack of 5 pin wiring harness sets

Part Number5240165 NCE5240165 Lighting decoder compatible with Woodland Scenics Just Plug and other lighting accessories with built in resistors Features of this decoder:: • Works with DCC or DC...

Part Number5240243 LED lighting, 20 LEDs, LED Tester, 50 feet ultra flex #32 wire, 40 resistors, 3 sizes heatshrink

DCC Main Bus Wire, (Red), 14AWG, 50 Feet.

Part Number5240267 NCE5240267 Layout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical 25 foot double track mainline.Includes: • Main Bus - 25 feet each red and black 14 AWG...

3300 Ohm resistor, 1/8 Watt, qty 20

Part Number05240212 NCE05240212 4.75" (1/2 wave effective) Antenna 916.50 Mhz

Gray Ultraflex wire, 32AWG, 10 feet.

Part Number05240119 Dimensions0.34" x 0.7" x 0.12" 8.6 x 18 x 3.2 mm UPC816757010410 1 Amp rating and four function outputs. Size: W .34" x L .70" x D .120".

NCE 5240011 PROCAB-R Deluxe Master Cab With Radio\nOur deluxe Radio Equipped Pro Cab R provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, backlit...

Part Number05240122 Dimensions3.475" x 0.370" x 0.120" UPC816757010441 Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and...

NCE 5240176 D13J DECODER 10 PACK

This decoder is made to fit the LifeLike HO Scale SW9/SW1200 switcher. Easy installation exactly replaces the existing PC board in the locomotive. No need to remove the weight. The decoder provides a...

Part Number05240127 N12A0e For N-scale Intermountain Tunnel Motors

FOR TWIN COIL SWITCH MACHINES ONLY All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses (1-2044) Runs...

Part Number5240290 NCEAND-8 8 Anderson power poles 4 red, 4 black, 12-16 AWG

Part Number5240291 NCEAND-24 24 Anderson power poles, 12 red, 12 black, 12-16 AWG

Part Number05240112 Dimensions1.45 x 3.75 x .625 in. 37 x 96 x 15 mm UPC816757010366 This Silent Running decoder is specifically designed for high stall current large scale locomotives such as those...

NCE Corporation 5240025 Power Cab DCC Starter Set

D13W decoder 4 pack - new smaller replacement for D13SR

Part Number05240242 Loco Wiring Kit for N/HO, 8 wire colors (80 feet ultra flex 30/32 AWG wire) , 3 sizes heatshrink

https://dqzrr9k4bjpzk.cloudfront.net/images/5106026/980620932.jpg

DCC Main Bus Wire, (Black), 14AWG, 50 Feet

Part Number5240293 NCEEuro3-5 3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG

Brown Ultraflex wire, 32AWG, 10 feet.

Track Bus Taps, (Yellow), package of 32, 10-12AWG

NCE 5240173 D13W DECODER 10 PACK

Track Bus Taps, (Blue), package of 64, 14-16AWG

Male Quick Connect, (Red), package of 64, 18-22AWG

Part Number5240308 NCE5240308 8 pack of 3 pin wiring harness sets

NCE CORPORATION

Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips Kato RS2 Kato RSC2 Kato SD80 Kato SD80MAC Kato SD90/43MAC Life Like RS2 Walthers GP18 Walthers RS2

Part Number05240139 UPC816757010571 This decoder is specifically designed as a replacement for Bachmann "DCC Equipped" diesels. Providing a smooth, quiet operation.The decoder has 4 function outputs...

Part Number05240131 Dimensions1.15" x 0.4" x 0.12". UPC816757010526 Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

NCE 5240005 #PB110 10AMP BOOSTER (G)\n10 Amp Power Booster recommended for O, G and other large scales. The PB-110A provides true 10 Amps of continuous power to your track. Enough to handle MUs of...

Part Number05240230 UPC816757010816 Use one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors,etc. Can be...

NCE 5240238 P514 5 AMP DC POWER 13.8

Part Number05240235 UPC816757010847 8 wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.

Part Number5240295 NCEEuro6-3 6 circuit Eurostyle Term strip, Package of 3, 14-24 AWG.

NCE 5240154 SWITCHIT MK2

Part Number05240211 UPC816757010717 Plug-pack, NMRA 8 pin plugs, 10 pack

NCE 5240221 P114, Now with 24 Watts! 13.8v DC Power Supply for Power Cab

Part Number05240200 UPC816757010601 The Auxiliary Input Unit (AIU) provides a means of connecting external devices such as switch contacts, Block Detectors (BD20), or other sensors to the NCE Cab...

Part Number5240162 Dimensions15 x 18 x 5 mm NCE5240162 UPC816757011653 6 pack of the Light-It Universal Lighting and Signal Decoder. Lighting decoder w/built-in white LED Features of this...

D13J decoder 4 pack - new smaller replacement for D13SRJ

Transformer -- 10 Amp, 18V AC

Part Number05240142 UPC816757010588 N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9

Part Number5240163 Dimensions15 x 18 x 5 mm NCE5240163 UPC816757011660 15 pack of the Light-It Universal Lighting and Signal Decoder. Lighting decoder w/built-in white LED Features of this...

Part Number0524-0120 Dimensions2.65" x 0.370" x 0.120" UPC816757010427 Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak)...

Part Number05240143 UPC816757010595 Drop in decoder for Kato N-Scale F3 A

Part Number5240171 Dimensions1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mm NCE5240171 D13W Decoder - new smaller replacement for D13SR Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7...

NCE 5240152 BUTTON BOARD USE W/0151

NCE 5240006 PH-10 10 Amp Starter Set with D408 decoder\nhe PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with 10 Amps of power for O-Scale and Large Scale...