Phoenix Model Buildings

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found...

A saloon built in Virginia City, Montana about 1875. It was constructed primarily of rough 6x12 timbers, laid up log cabin style. The finished and ornamented false front provided a sharp contrast to...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut...

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings.Foot Print: 2.25" x 2.625" Note: Pictures may be of another Road Number.

Based on a store in Jefferson Oregon.Footprint: 1 1/4” x 2” Note: Pictures may be of another Road Number.

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 1 3/8" x 2 1/8". Note:...

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.Footprint: 1.75" x 2.25". Note: Pictures may be of another Road Number.

Based on the Cherry Valley Lumber Car in the North-West.Footprint: 0.6" x 2.85" Note: Pictures may be of another Road Number.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines. Note: Pictures may be of another Road Number.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings.Footprint 1.25”...

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.Footprint 1.75” x 3.25”...

Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed. With a foot print of 2" by 6" it has plenty of storage room. Laser kit stud back and end wall framing with plywood...

One of the 5 structures in our new complex of kits. With a foot print of 5" by 5" this makes for a main industry. It includes 2 different roof signs, laser cut plywood walls, laser cut widows and...

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 2.0" x 2.7". Note: Pictures may be of...

A prefect small building for that down town street or back road.Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light...

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 3.25" x 4.25” Note: Pictures may be of another Road Number.

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. Kit...

A small roof top water tank and tower.foot print- 2x2 inches by 5 inches tallincludes Tichy NWB's Note: Pictures may be of another Road Number.

This 28' car uses RSLaser wood parts along with Tichy and Grandt Line Products detail parts. Customer Ron Clot had the following to say about this kit: "I just completed your On30 pickle car kit and...

A O scale version of Our Grove Building.Foot print of 11 3/4 x 8 inches and 11 3/4 tall at signIncludes Tichy windows and doors plus all the back porches. Note: Pictures may be of another Road Number.

The kit has a card sub-frame, laser cut board on board siding with peal and stick metal standing seam roofing, laser cut windows and doors.Footprint: 4.5" x 7" Note: Pictures may be of another Road...

Modeled from the D&RGW Narrow Gauge Prototype. Note: This is a Narrow Gauge tower and would need to be raised some for Standard gauge. Track and scenery are not included.Footprint: 2.2”...

RS Laser SCM103B O Scale Randolph Depot Building Kit Note: Pictures may be of another Road Number.

For that special spot on the layout. See how many of your visitors notice this little gem.

A nice side factory or warehouse for your layout.Foot print is 11 1/4 x 3 inches and includes Tichy windows and doors plus pre-colored roofing Note: Pictures may be of another Road Number.

This is a 100 ft long cover bridge and is like many bridge used around the country. The kit includes stone easer cut abutments which allow for 1 7/8 inch clearance under the bridge. Designed to be a...

This kit is based on the water tank at Green Island on the Delaware & Hudson RR

Kit contains enough roofing to cover an area 20 square inches at a 6" exposure.Comes in 10 colors. Note: Pictures may be of another Road Number.

Kit contains enough roofing to cover an area 20 square inches at a 6" exposure.Comes in 10 colors. Note: Pictures may be of another Road Number.

Kit contains enough roofing to cover an area 20 square inches at a 6" exposure.Comes in 10 colors. Note: Pictures may be of another Road Number.

Kit contains enough roofing to cover an area 20 square inches at a 6" exposure.Comes in 10 colors. Note: Pictures may be of another Road Number.

Kit contains enough roofing to cover an area 20 square inches at a 6" exposure.Comes in 10 colors. Note: Pictures may be of another Road Number.

N scale aged brick sheets Running bondThese sheets ate 3 7/8 by 7 3/4 inches and are .015 thick.No painting required or mortar fill, sheet are east to cut and fold.See photo of the S scale chimney...

Laser Board sheets that cover a scale area of 48 ft high by 108 feet long. Sheets are 4 x 8 inches with a usefull area of 3.75 x 7.75 inches. Has many uses some of which are siding on mills, exposed...

Laser Board sheets that cover a scale area of 48 ft high by 108 feet long. Sheets are 4 x 8 inches with a usefull area of 3.75 x 7.75 inches. Has many uses some of which are siding on mills, exposed...

Sheets are true scale size common concrete blocks in a running bond. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch thick (0.015). Sheets are 4 x 8 inches with a...

Sheets are true scale size 2x8 wood form section in a running bond. Can be used for foundations, retaining walls and portals, any were concrete has been formed when poured. Sheets cut from laser...

Sheets are true scale size 2x8 wood form section in a running bond. Can be used for foundations, retaining walls and portals, any were concrete has been formed when poured. Sheets cut from laser...

Sheets are true scale size common brick (2 1/2 by 7/1/2 inches) in a running bond. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch thick (0.015). Sheets are 4 x 8...

Sheets are true scale size common brick (2 1/2 by 7/1/2 inches) in a running bond. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch thick (0.015). Sheets are 4 x 8...

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

This would look great around that hot tub or the back yard on any house. You get 4-24 foot sections for 96 scale feet.

Note the frame on back side. All laser cut, all you need to do is glue the frame on and set on your layout. This fence has 144 scale ft and no gate.

The fence is a scale 6 foot tall Comes with with laser cut support framing, 4 - 24 ft. sections of fence and a 4 ft gate section for a total of 100 scale feet of fencing. Has boards on both sides of...

Kit contains 6 - 80 Foot Span Trusses with a 4/12 Slope.

Kit contains 8 - 60 Foot Span Trusses with a 4/12 Slope.

Kit contains 10 - 50 Foot Span Trusses with a 4/12 Slope.

Kit contains 12 - 40 Foot Span Trusses with a 4/12 Slope.

A 60' span girder bridge with a 45 degree crossing.

A 60' span girder bridge with a 22.5 degree crossing.

A 40' span girder bridge with a 45 degree crossing.

A 40' span girder bridge with a 90 degree crossing.

A prefect small building for that down town street or back road. Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light.Foot...

Asher Supply is a small Stone building that has many uses. Could be a track side freight house or warehouse. Or a in town contractors supply house.Footprint: 2 3/8 by 6 1/2 inches.

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the...

A brick farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys.Footprint: 2-1/2” by...

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included.Footprint: 1-1/4” by 1-1/4”.

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts.Footprint: 2.25" x 2.25" x 4" tall.

This shed is based on a speeder shed on the late John Allen's G&D layout. Kit includes, fuel oil tank code 40 weathered rail for the speeder track strip wood for the rail in fill decks.Speeder...

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house...

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts...

The freight house at the crossing of the Mono and Nickel Plate Railroads at Linden Indiana.Footprint: 3 3/8” x 4 1/4“

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum...

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint" 1 7/8” by 2”

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing...

This little shop is typical of businesses in small towns across the country. Some are still standing today, they have been renovated for a variety of uses.Footprint: 1.60 x 2.25 inches

This could either be a thriving steam era hotel or a refurbished building for tourists in your area.Footprint: 2.50" x 3.75".

Based on those found in the pacific northwest from the early 1900s to the end of RR logging.Footprint: 0.6" x 2.85"

Base on many of the newer log houses and lodges being built all over the country.Footprint 3.0” x 4.0”.

Out house’s were an icon until the late 50 in most of rural America and still many are in use today. The kit includes 3 unique out houses with seats. Two single stall and one two stall. Use them...

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines...

Rslaserkits 1988B O Scale Wall Doors #2161

Rslaserkits 1988A O Scale Wall Doors #96

Kit contains 4 24 foot ladders.

Delivery wagons based on drawing and Photos of wagons used from the 1850’s till the early 1900’s.

Each stair kit has 12 stringers, 80 treads and an assembly jig. 4 foot treads

The perfect station for any railroad. This kit has been designed to accurately represent the prototype structure in N scale. Builds either early or late version. More than 230 pieces of precision...

Kit contains 4 sheets off roofing that will cover an area 24 square inches at a 6" exposure. Comes in 10 colors.

Kit contains 4 sheets off roofing that will cover an area 24 square inches at a 6" exposure. Note: Pictures may be of another Road Number.

Kit contains: 6 Doors that fit Tichy No.8032. Comes in 6 styles.

Kit contains: 6 Doors that fit Tichy No.8032. Comes in 6 styles.

Kit contains: 6 Doors that fit Tichy No.8032. Comes in 6 styles.

Kit contains: 6 Doors that fit Tichy No.8032. Comes in 6 styles.

Kit contains: 6 peak fans, 7'-4" span. Comes in 6 styles.

Contains one 8 x 11 inch sheet. Each sheet has a 4 x 8 inch area of engraved brick in the herringbone pattern plus five 7.75 inch long strips of edging brick. This is the perfect product for your...

Contains one 8 x 11 inch sheet. Each sheet has a 4 x 8 inch area of engraved brick in the herringbone pattern plus five 7.75 inch long strips of edging brick. This is the perfect product for your...

Sheets are true scale size common brick (2 1/2 by 7/1/2 inches) in a running bond. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch thick (0.015). Sheets are 4 x 8...

Sheets are true scale size common brick (2 1/2 by 7/1/2 inches) in a running bond. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch thick (0.015). Sheets are 4 x 8...

Contains one plywood deck with peel and stick backing.

Rslaserkits 2529 HO Scale Pool Tables

Kit builds one roof top water tank. Footprint: 1 3/4” by 1 /3/4”.

This kit has the parts for 6 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/16 Basswood colored Task board and have staggered ends , with the...

This kit has the parts for 6 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/16 Basswood colored Task board and have staggered ends , with the...

Kit contains 4 - 24 foot ladders.

Include 6 - 24 scale feet long 6 foot high panels and all are different as to ageing and sections cut out.

Fence leans to the side about 9 degrees from vertical for the falling over look. Include 6 - 24 scale feet long 6 foot high panels and all are different as to ageing and sections cut out.

A sheet includes 8 wheels at 48” and 54" in diameter and 8 wheels at 66” and 72" In diameter. cut from .024 laser board Note: Pictures may be of another Road Number.

These are the perfect starter kit for your fist wood kit. The kit includes 6 laser cut picnic tables and 3 pages of directions with color photos. There are only nine parts per table so it's a good...

Kit contains enough 5 foot scaffolding sections and braces to do a 30 ft. high by 70 ft long wall. 24 sections of 5 ft. by 5 ft. frames. 50 sections of bracing and 50 double wide planks.