Marklin

Contents: 1 left turnout, 1 right turnout and 2 curved tracks made of stable, child-friendly plastic. Note: Pictures may be of another Road Number.

180 mm / 7-3/16". Contents: 6 pieces.

Dealer package assortment with 10 rolls each of red, brown, blue and yellow wire. Length of each roll 10 meters / 390 inches. Wire cross section 0.75 sq. mm / 0.0012 sq. in. (approximately 18 gauge)...

2.5 mm / 3/32" high. This is used as a pillar foundation. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height. From the simple...

This set enables easy control of the turntable with track indexing in the Digital system. The deck turns to the right/left in single steps or continuously. The set consists of an electronic control...

For cars 4131, 4132 and 4133. The kit consists of a pickup shoe and a ground spring, an adjustable light diffuser, 2 light sockets and 2 light bulbs.

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 56 mm / 2-7/32".

This is a replacement base for standard masts. It can be shortened for all available H0 track systems with or without roadbed. The base comes with a screw suitable for mounting a mast. 20 pieces to a...

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

Very fine engraving. This is a kit for a single-track girder bridge with the look of steel. It has abutments, but no pillars. This cardstock kit is made of high quality precision laser-cut...

This unit is a current inverter for the 66630/66361 and 60041/60061 switched mode power packs to change the voltage from DC to AC or for connections with accessories using DC voltage. The AC voltage...

The Connect-6021 is for bidirectional connections between the former Marklin Digital System and the 60213-60215 and 60216/60226 Central Station. This allows you to control 80 locomotives (Motorola...

4 aspects "Stop" (Hp0), "Proceed" (Hp1), "Proceed Slowly" (Hp2), and "Train Halt, Switching Allowed" (Hp00/Sh1). LED lighting. Height 34 mm / 1-5/16".

Finely crafted reproduction of important prototypes. Metal masts. LEDs for good illumination. Plug-in base for easy installation and removal. Height 100 mm / 3-15/16".

For cars 42101, 42131, 4214, 42141, 42142 and 4229. The kit consists of a pickup shoe and a ground spring, a light diffuser, a light socket and a light bulb.

6 mm / 1/4" high. This pillar is for building ramps in 6 mm / 1/4" increments. Bridges and approach ramps bring the third dimension to a model railroad layout: from flatness to a sense of height...

Distribution device for connections for up to a maximum of 5 MS II to an output on the 60112 or 60113 digital connector box. An MS II Hub can be connected to both outputs on the connector box. Hence,...

1 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 14-3/16" / 30?. Outer curve: 30? with the parallel curve spacing of 77.5 mm / 3-1/16". Can be retrofitted with the 74492...

Length 1/1 = 30?.

Length 1/8 = 3? 45'.

Length 1/4 = 45 mm / 1-3/4".

Length 1/2 = 90 mm / 3-9/16".

Length 1/1 = 45?. Small radius for branch lines and industrial trackage. Cannot be used for long locomotives and cars.

R1 = 360 mm / 14-3/16" / 30?.

Length 1/2 = 15?. Radius 424.6 mm / 16-3/4". Momentary contact with a locomotive/car pickup shoe.

Length 1/2 = 15?. Radius 360 mm / 14-3/16". Momentary contact with locomotive/car pickup shoe.

Length 35.1 mm / 1-3/8".

Length 1/2 = 15?.

Length 1/4 = 7? 30'.

Length 1/4 = 7? 30'.

Length 1/8 = 22.5 mm / 7/8".

R1 = 360 mm / 14-3/16" / 15?.

188.3 mm / 7-13/32".

Length 3/4 = 22? 30'.

Length 1/6 = 30 mm / 1-3/16".

Length 1/2 = 15?.

Length 1/1 = 180 mm / 7-3/32" (standard length).

94.2 mm / 3-11/16". Content: 1 piece. This is an uncoupler track for manual and electric uncoupling. The electric operation can be done only with the 72752 control box and the cable included with...

Length 1/1 = 30?.

Transparent C-Track curved R1, 30? for showcases, presentation bases and for decorative purposes. You get one piece of track.

360 mm / 14-3/16".

171.7 mm / 6-3/4". Package quantity: 6 pieces.

94.2 mm / 3-11/16".

R1 = 360 mm / 14-3/16" / 30?. Package quantity: 6 pieces.

Gauge: HO System: AC UPC/EAN: 4001883201993

Contents: 1 left turnout and 1 right turnout, as well as 2 sections of curved track to go with them (turnout curves), made of sturdy plastic just right for children.

77.5 mm / 3-1/16".

Radius R4 = 579.3 mm / 22-13/16". Curve 30?. Parallel curve to Radius R3 with a spacing of 64.3 mm / 2-9/16". 12 sections of track form a circle with an outer diameter of 120 cm / 47-1/4".

Gauge: HO System: AC UPC/EAN: 4001883201979

R2 = 437.5 mm / 17-1/4" / 15?. Momentary contact by means of locomotive/car pickup shoe.

Length 14? 26'. Complementary curve to the 22715 and 22716 turnout.

Length 236.1 mm / 9-5/16". This track is the same length as the length of the wide radius turnouts and wide angle crossings.

Length 1/1 = 30?.

R2 = 437.5 mm / 17-1/4" / 30?.

R2 = 437.5 mm / 17-1/4" / 24.3? (turnout branch).

R2 = 437.5 mm / 17-1/4" / 7.5?.

Detachable hand lever included. Fixed frog and guard rails. Length of the straight side 225 mm / 8-7/8". Turnout branch 14° 26'. Branch radius 902.4 mm / 35-1/2". A 75491 electric turnout mechanism...

Detachable hand lever included. Turnout branch 22° 30'. Branch same as 2232. Length of the straight side 168.9 mm / 6-5/8". A 75491 solenoid mechanism can be installed on these turnouts. Ho Scale.

For locomotives 81281, 88040, 88062, 88063, 88080, 88081, 88082, 88090, 88091, 88120, 88121, 88181, 8820, 88201, 88223, 88290, 88321, 88410, 88433, 88463, 88464, 88481, 88482, 88490, 88491, 88501,...

Inner curve: R1 = 360 mm / 14-3/16" / 30°. Outer curve: 30° in the parallel curve spacing of 77.5 mm / 3-1/16". Manual hand lever included. Can be retrofitted with the 74491 turnout mechanism, 74461...

Length 236.1 mm / 9-5/16". Crossing angle 12.1°. Crossing legs electrically isolated from each other. 4 sections of 24071 track are required at the ends of the crossing (not included with 24740). 2...

R1 = 360 mm / 14-3/16" / 15°. Momentary contact by means of locomotive/car pickup shoe. HO Scale.

Crossing angle 14° 26'. Track length 225 mm / 8-7/8". HO Scale.

Length 2 x 1/2 = 2 x 90 mm / 3-9/16". Continuous contact through wheel sets on locomotives / cars. The two track sections have an insulated rail section for track occupation feedback signal when a...

Length 1/2 = 90 mm / 3-9/16". Momentary contact with a locomotive/car pickup shoe.

Crossing angle 45°. Track length 90 mm / 3-9/16". HO Scale.

Snap-in end piece for the C Track roadbed. For the end of a train line, sidings, display bases, and display cases. Length 16.5 mm / 5/8". 10 pieces in a package.

HO Scale.

This wire is used for the ground side of single and double solenoid accessories. This wire can be used with the Marklin plugs and sockets. This wire is easy to work with. Marklin All Gauges. High...

Manufacturer: Mrklin Art.-No. 7226 EAN: 4001883072265 Gauge H0 1:87 Power system AC Delivery Date: 2001 Rauchsatz fr Mrklin-Loks bestehend aus Raucheinsatz, Ersatzdampfrohr, Reinigungsdraht und...

Double-Arm Pantograph. Gauge: H0. Type SBS 10 for older design locomotives. Interchangeable with 7218.

These pickup shoes are for the older 3015 Swiss electric and the 3027/3047 German steam locomotives. These pickup shoes have nickel-plated ski-shaped shoes for superior conductivity. These pickup...

Marklin 785550 COUNTER SINK SCREWS 10/PK

HO TRACTION TIRE PK/10.These traction tires provide greater pulling power for Marklin H0 locomotives. They are for locomotives with medium sized driving wheels and are precision made to fit correctly...

Rerailer Ramp. Gauge: H0. The rerailer ramp facilitates placing multi-axle locomotives and cars on the track. Length 30 cm / 11-1/16". Height 2.5 cm / 1".

Manufacturer: Mrklin Art.-No. 7149 EAN: 4001883071497 Gauge Neutral Package content: 10 ml Delivery Date: -ler mit Dosierspitze. Enthlt 10 ml Speziall zur Schmierung der Lokomotiven und Wagen.

Marklin 7244 UNIVERSAL RELAY

Reed Switch. Gauge: H0. The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the...

STATION PLATFORM LIGHT

Control Box. This control box is for turning 4 different track or accessory circuits on and off. For example, power can be controlled in 4 storage sidings in 4 different track circuits. Unit comes...

Manufacturer: Mrklin Art.-No. 60982 EAN: 4001883609829 Gauge H0 1:87 Power system all Digital-Decoder: DCC & Motorola Digital-Decoder: mfx Digital Interface: Elektrische Schnittstelle fr...