Buildings & Structures

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today. This kit can be built either as a wood sided...

A saloon built in Virginia City, Montana about 1875. It was constructed primarily of rough 6x12 timbers, laid up log cabin style. The finished and ornamented false front provided a sharp contrast to the rough cabin construction.Foot Print: 1.25" x 2...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings.Foot Print: 2.25" x 2.625" Note: Pictures may be of another Road Number.

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint: 1 3/8" x 2 1/8". Note: Pictures may be of another Road Number.

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop.Footprint: 1.75" x 2.25". Note: Pictures may be of another Road Number.

False front stores like these were a staple on main streets all over North America.Footprint: 1.75 x 2.25 inches. Note: Pictures may be of another Road Number.

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do not have access to a siding so they can unload rail...

Based on the Cherry Valley Lumber Car in the North-West.Footprint: 0.6" x 2.85" Note: Pictures may be of another Road Number.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be used right through the transition period.Footprint...

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. With a foot print of 10 x 20 feet they will fit almost...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines. Note: Pictures may be of another Road Number.

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek.Footprint 1.75” x 3.25”. Note: Pictures may be of another Road Number.

Second structure for the Feed and Seed complex is a 5 Bay Open Storage Shed. With a foot print of 2" by 6" it has plenty of storage room. Laser kit stud back and end wall framing with plywood sheeting for the exterior walls and enough to sheet the inside...

One of the 5 structures in our new complex of kits. With a foot print of 5" by 5" this makes for a main industry. It includes 2 different roof signs, laser cut plywood walls, laser cut widows and trim, plus glazing, loading dock stairs and foundation...

Another kit based on Paul Templar's design. This time a repair and horse shoeing shop. Kit comes with the printed signs and a glue down tar paper roof.Footprint: 2.0" x 2.7". Note: Pictures may be of another Road Number.

Built-&-Ready® Landmark Structure®, Kids Clubhouse, is the local hangout for the neighborhood kids. This rickety building was scabbed together and built entirely from scraps. The exterior is decorated with hand-painted messages and salvaged...

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System . This homey building...

Kato 23-438C N Scale Large High-Rise Building Boutiques & Offices Silver

Detailed model Ready to use Note: Pictures may be of another Road Number.

Detailed model Ready to use Note: Pictures may be of another Road Number.

Detailed model Ready to use Note: Pictures may be of another Road Number.

Detailed model Ready to use Note: Pictures may be of another Road Number.

Detailed model Ready to use Note: Pictures may be of another Road Number.

Detailed model Ready to use Note: Pictures may be of another Road Number.

Laser cut construction…. this is one approach in adding interest to an otherwise plain building !

We’re constantly striving to do the best models in the hobby…. and “N”-scale is a large part of that. “Jeffries Point” is based on a prototype as modeled on the famous “Franklin & South Manchester R.R...

Now offered in TWO Scales: HO Scale: For info regarding the HO Scale version, please see the video titled “A Look at Old Dominion…” *Please note that the complimentary set of Woodland Scenics figures referenced in the N Scale...

When famed model railroader/author Mike Tylick first learned of the concept of the “1-Kit” he decided it would be useless to him, Mike is a wonderful, allbeit eclectric modeler & individual. Mike was commisioned to construct our...

When famed model railroader/author Mike Tylick first learned of the concept of the “1-Kit” he decided it would be useless to him, Mike is a wonderful, allbeit eclectric modeler & individual. Mike was commisioned to construct our...

Kato 23-406 N Scale Restaurant or Professional Building

It was our pleasure to meet Paul and speak to him shortly before his death, and it’s with great honor that we named this structure after him. As an “earlier” kit the windows are laser-cut, the storefront windows are pre-printed, and the kit comes with...

Whistlestop Junction was the first structure we ever produced to be made available through hobby shops. Available in both “N” & “HO” scales we wanted to make sure we were going to take a different approach to our models, not...

A nice side factory or warehouse for your layout.Foot print is 11 1/4 x 3 inches and includes Tichy windows and doors plus pre-colored roofing Note: Pictures may be of another Road Number.

This is a 100 ft long cover bridge and is like many bridge used around the country. The kit includes stone easer cut abutments which allow for 1 7/8 inch clearance under the bridge. Designed to be a simple build and no cutting involved other then what is...

This kit is based on the water tank at Green Island on the Delaware & Hudson RR

A prefect small building for that down town street or back road. Includes a full interior complete with 2 pool tables, Bar and back bar, Stools and cue rack plus wall paper. Also a LED light.Foot print with sidewalk 1 3/4 x 2 3/4 inches

Asher Supply is a small Stone building that has many uses. Could be a track side freight house or warehouse. Or a in town contractors supply house.Footprint: 2 3/8 by 6 1/2 inches.

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the 1920’s it was the home of Harter Silos. Harter had the...

This shed is based on a speeder shed on the late John Allen's G&D layout. Kit includes, fuel oil tank code 40 weathered rail for the speeder track strip wood for the rail in fill decks.Speeder also included with kit.Footprint: 1” by 2 1/2”

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house.Footprint: 1 1/4” by 2 1/4”

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts plus two picnic table kits and a sign sheet with 5...

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum.Footprint: 1 13/16" x 3 1/8th"

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing.Footprint" 1 7/8” by 2”

Based on the Oliver Plantation store built in 1908. The store was still in use in the late 1980’s. Kit includes laser cut plywood walls, laser cut windows and doors, BIS corrugated roofing. roll roofing and a sign sheet with different names for the...

This little shop is typical of businesses in small towns across the country. Some are still standing today, they have been renovated for a variety of uses.Footprint: 1.60 x 2.25 inches

This could either be a thriving steam era hotel or a refurbished building for tourists in your area.Footprint: 2.50" x 3.75".

Based on those found in the pacific northwest from the early 1900s to the end of RR logging.Footprint: 0.6" x 2.85"

Base on many of the newer log houses and lodges being built all over the country.Footprint 3.0” x 4.0”.

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines throughout the country. These structures allowed typical...

The perfect station for any railroad. This kit has been designed to accurately represent the prototype structure in N scale. Builds either early or late version. More than 230 pieces of precision laser cut wood, + shingle sheets. Roof panels have scribed...

Bar Mills Models 0531 N Scale Shaw's Ridge Eqpt

“J. Baum” is part of our “Franklin & South Manchester” Tribute Series…. The structure features a lower story brick-type construction & an upper clapboard style. Geared towards the intermediate level modelers...

N Scale- 4 Wide x 3 Deep Note: Pictures may be of another Road Number.

The “Lowboy”{ was designed for swampy and low drainage areas… if you don’t have a large mountain pass to traverse why spend $$$ on an oversized trestle?… The “Lowboy” is about 6″ long and designed so it...

A general purpose freight shed that is not specific to any railroad. Features interlocking design for easy build. Note: Pictures may be of another Road Number.

A general purpose train station that is not specific to any railroad. Features interlocking design for easy build. Note: Pictures may be of another Road Number.

Gas StationContains one kitClassic 1950’s gas station.Building Footprint requires a 3.5"x3.5" area Note: Pictures may be of another Road Number.

GarageContains one kitGreat addition to go along with the lake side cottage.Building Footprint 1.625”x1.875" Tools neededModelling knifeWhite glueSelection of brushes ?Suggested paint coloursPaint to desired colour Note: Pictures may be of another...

Kato 23-176 N Scale Island Platform End C (1 Set)

Kato 23-180 N Scale Unitrack One Side Platform End

Kato 23-179 N Scale One-Sided Platform Type B

Kato 23-178 N Scale Unitrack One Sided Platform A

Kato 23-175 N Scale Unitrack Island Platform End B

Kato 23-174 N Scale Island Platform End A

Kato 23-173 N Scale Unitrack Island Platform C

Kato 23-172 N Scale Unitrack Island Platform B

Kato 23-170 N Scale Island Platform Set

Osborn Model Kits 3102 N Scale Two Bedroom Bungalow Kit

Osborn Model Kits 3084 N Scale Baggage Cart Kit

GazeboContains one kitComplete that park scene with a Gazebo Tools neededModeling knifeWhite glueSelection of brushes Suggested paint coloursPaint to desired colour or use a Hunterline mix Note: Pictures may be of another Road Number.

120" Hydro TowersContains 2 towersEasy assembly 120' scale hydro towers Tools neededModeling knifeWhite glueSelection of brushes Suggested paint coloursSteel colour Note: Pictures may be of another Road Number.

Add an air strip to you layout, along with our airplanes this hangar will make the scene!Building Footprint 4.25”x4.25” Tools neededModeling knifeWhite glueSelection of brushes Suggested paint coloursWhiteOlive DrabBlack Note: Pictures...

Snack ShackContains one kitA common roadside snack bar seen all over North America.Kit includes three picnic tables.Building Footprint 1.25”x1.125” Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursPaint to...

Grain ElevatorBased on Canadian Pacific 60,000 bushels elevator, these were seen all over the prairies in the early part of the 1900’s.Building Footprint requires a 6.6”x4.5” area Tools neededModelling knifeWhite glueSelection of...

A classic wooden water tower that can be used on any part of your layout. Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursLeave natural or paint to desired colours Note: Pictures may be of another Road Number.

Picnic TablesContains 6 tablesThese tables are easy to build and make a great addition. Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursHunterline light grey Note: Pictures may be of another Road Number.

ChurchContains one kitTypical small town church.Building Footprint 4.125”x2.2” Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursPaint to desired colour Note: Pictures may be of another Road Number.

Osborn Model Kits 3029 N Scale Barn

Osborn Model Kits 3025 N Scale Lakeside Cottage

Used to fuel up the diesel locomotives.Contains: pump house, tank, spill walls and fuel fill pipe.Footprint 2.875" x 1.25" Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursConcreteGreenWhite Note:Pictures may be of another...

Used to house electrical components required for automated warning lights and signals along the right of way. Kit Includes two units. Footprint .6" x .4" Tools neededModelling knifeWhite glueSelection of brushes Suggested paint coloursAluminium...

Used to house all the electrical components required for automated warning lights and signals along the right of way. Kit includes two units.Footprint 1.022" x 1.022" Tools neededModelling knifeWhite glueSelection of brushes Suggested paint...

A classic station order board can be used for CP or CN Contains one kit. Tools neededModelling knifeTweezersWhite glueSelection of brushes Suggested paint coloursAluminium paintBlack paint Note:Pictures may be of another Road Number.

Kato 23-177 N Scale One-Side Platform Set Note: Pictures may be of another Road Number.

N Scale kit features, Laser cut walls, roof and landing support. Injection molded windows and doors. Cast metal details

Residents of your layout will want to shop at the classic Toy & Hobby Junction. This mid-20th century era Built-&-Ready® structure features a grand staircase in the center of the two-story building. Showcase the colorful games and hobbies...

Woods Furniture Company is the ideal focal point of economic activity. Set this highly detailed full-scale manufacturing and distribution center on your layout's main spur. Includes many details, such as a water tank, cyclone, ladders, dock bumpers,...

Kato 23-439 N Scale High-Rise Corporate Office Building - Requires assembly Dimensions: 5" x 4.5" footprint, 8.5" height

Kato 23-229 N Scale Steam Engine Service Facility Set - Requires assembly

Included in the N scale version #9310: Five strips of barn yard fence and fence bracing Two gates sections 338 scale feet of scale fence. (Approx. 25 inches) Made of micro plywood. Instructions included.

Every railroad needs an overhead crane to lift heavy objects from railcars to trucks for delivery to its final destination. They are used for lifting quarry stones, pre cast concrete parts, steel coils, steel rails, large crates or anything that...

Dimensions: 30 X 80 Scale Feet Stock No. 8003 Building shown 20 scale feet tall. This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut lines to...

Dimensions: 30 X 40 Scale Feet Stock No. 8001 This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut lines to produce a 20,16,12, or 10 foot tall...

Dimensions: Office 30 X 60 Scale Feet (2-3/8 X 4-5/8 inches) / Warehouse 70 X 80 Scale Feet (5-1/2 X 6-1/8 Inches) Stock No. 8016 This kit is designed to build the building shown or arranged in a variety of ways. Cut lines for different heights are...

Dimensions: Office 50 X 40 Scale Feet Dimensions: Warehouse 70 X 60 Scale Feet Stock No. 8015 This kit is designed with cut lines on the back side of the walls so that you can choose the height of the building. Walls are 24 scale feet high with cut...

Dimensions: 70 X 40 Scale Feet Stock No. 8011 This kit can be built 20 or 24 scale feet tall. 20 feet tall shown. End walls and side walls have door openings provided . Rear walls have cut lines for optional door openings Kit includes doors,...

Kit measures 5-1/2 X 11 inches and stands 3-3/8 inches tall. The Atkinson Engine Facility is modeled after an existing engine facility build in the early 1970?s. The Structure is designed to allow the engines to be serviced under roof and provide office...

Dimensions: 40 X 80 Scale Feet Stock No. 8008 This kit is designed to be built 24 scale feet high engine facility with 12 foot tall office. Side walls have cut lines provided door openings shown. End walls have engine house door openings provided...

This Kitbasher Series kit will require some cutting of openings for doors and windows without the pre-measured cut lines usually provided by Pikestuff. Pikestuff has chosen a plastic which is easy to cut, with the use of a sharp hobby knife. Location of...