Zona

OverviewZona Fine Saw Hobby Knife Blades (#13) Used for precise cutting of paper, plastic, balsa, thin metals, cork and foam. 42 Teeth Per Inch cutting blades provide fine cuts. Fits Zona 39-910...

OverviewZona #10 Hobby Blade – General-purpose curved knife blade for general cutting, light carving, and slicing paper, plastic, balsa, bass wood, light cardboard, vinyl, rubber, and foam. Fits Zona...

OverviewHobby Knife Blades fit Zona 39-910 Hobby Knife and similar tools. 39-922 #16 Hobby Blade is a delicate cutting tool designed for scoring lightweight materials such as light paper, soft woods,...

OverviewLight-duty knife with anti-roll design & soft grip handle for comfort and control. Rear blade release holds blades securely. Safety cap protects blades and fingers. No.11 blade in handle...

Overview1 inch Wide Sanding Strips 400 Grit

Overview1 inch Wide Sanding Strips Assorted Grits

OverviewSlide Lock, Stainless Steel Tweezer 4-3/4in. Long. Slide Lock, Stainless Steel Tweezer 4-3/4in. Long.

OverviewFlat Blade Stamp Tweezer 4-1/2in. Long, Stainless Steel.Flat Blade Stamp Tweezer 4-1/2in. Long, Stainless Steel.

OverviewL-Square Ruler is made from .022″ thick stainless steel with 1/32″ measuring intervals and metric equivalents on back. MADE IN USAL-Square Ruler is made from .022″ thick stainless steel with...

Overview 20-piece miniature drill set in plastic dispenser with one each of high speed twist drills in wire gauge measured in metric sizes 0.3mm – 1.6mm. Drill soft metals, wood, plastics and...

OverviewRevolving tool holder has a ball-shaped pin vise head that fits into the palm of the hand. The thumb and index finger are used to twist the chuck. Useful for drilling larger holes in soft...

OverviewMini Ball Peen Hammer – 1-oz. Mini Ball Peen Hammer for flattening, shaping and removing dents. Sturdy hardwood handle. 8-1/8in. long.Mini Ball Peen Hammer – 1-oz. Mini Ball Peen Hammer for...

Overview Recommendations to make the best selection for your scroll saw: Can also be used in a Jeweler’s Saw Frame! Fits most 5″ scroll saws (Craftsman®, Delta®, DeWalt®, Excalibur®, Ryobi®), but...

Overview5 inch Jewelers Saw Blades

OverviewKeyhole Saber Replacement Blades Medium 24 TPI (teeth per inch) keyhole saber blade with a.010″ thickness, tooth set range of .012/.014″, 3/8in. wide x 2-1/4in. long. 3-pack. Cuts on pull...

OverviewRazor Saw Replacement Blade Ultra Thin Kerf 24 TPI (teeth per inch), has a blade that is .015″ thick, with .016/.018″ tooth set range, 4-1/2″ long, 7/8″ deep, angled back. For discontinued...

OverviewRazor Saw Replacement Blade Ultra Thin Kerf 32TPI, has a blade that is .008″ thick, with a tooth set range of .009/.011″ (Zona’s thinnest available), 4-1/2in. long, 1/2in. deep, angled back...

OverviewRazor Saw Replacement Blade Ultra Thin Kerf Razor Saw has a blade that is .008″ thick, with a tooth set range of .009/.011″ (Zona’s thinnest available), 52 TPI (teeth per inch), 4-1/2″ long,...

OverviewThis junior hack saw has a blade tensioning end screw for easy blade installation and control. Cut wood, plastic, and metal. Compact for easy portability and storage in tool box, glove...

OverviewDeluxe Handle Fine Kerf Universal Razor Saw has a blade that is .010″ thick with a tooth set range of .012/.014″, 6-1/2″ long, with a 1-3/16″ cutting depth, and steel back for stability. For...

Overview32 Teeth Per Inch. Fine Kerf Universal Razor Saw has a blade that is .010″ thick with a tooth set range of .012/.014″, 6-1/2″ long, with a 1-3/16″ cutting depth, and steel back for stability...

OverviewAluminum Miter Box and Fine Kerf Saw – 6-1/2in. aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw. Saw Specs: 6-1/2in. long x 1-3/16in. deep with...

Overview4-in-1 with larger deluxe handle and 4 removable blades: 32 TPI (teeth per inch), thin kerf razor saw blade with a.010″ thickness, tooth set range of .012/.014″, 5-1/2″ long with cutting...

Small Steel Pin Vise has chuck capacity of 0.254 to 1.143mm (.010″ – .045″). 3-3/8″ overall length. Steel pin vises for holding wire, rod, drills, taps, reamers, etc. Both can...

3 per package Mini Hack Saw blades 5-3/4in. long between pins. .250in. wide x .015in. thick.36-656 is 15 TPI and is for cutting hard or soft wood.

Archimedean or spiral hand drill for use with small wire size drills (#70 to #80). Push ring down to turn drill. Spring return makes drilling fast and easy. 4-1/4″ overall length.Operates by...

2 blades to fit the Zona Spoke Shave. Blades are 7/8″ wide x 5/8″.

Each sheet of 3M Micro Graded Wet/Dry Polishing paper assortment is 8-1/2″ x 11″. Each grade is color coded for easy identification and is listed below from finest to coarsest. Abrasive...

Cross Locking, Stainless Steel Tweezer 4-3/4in. Long.

6-1/2in. aluminum miter box with 30, 45, 90 degree angles, unique thin slots for accurate cuts with fine kerf saws 35-500, 35-550, 35-520, 35-560. James Brook wrote in the Dec. 2014 issue of...

5-pc Stainless Steel Tweezers Set in sturdy plastic case includes:37-542 Fine Point 4-1/4″ long37-543 Flat Blade 4-1/2″ long37-547 Slide Locking 4-3/4″ long37-548 Curved Point...

Replacement Sandpaper Bands for 1-1/2in. wide Finger Sander 37-795. 3-packs 320 grit fine 37-798

Replacement Sandpaper Bands for 1-1/2in. wide Finger Sander 37-795. 3-packs 240 grit medium 37-797

Large Steel Pin Vise has chuck capacity of 1.9812 to 3.175mm (.078″ – .125″). 3-7/8″ overall length. Steel pin vises for holding wire, rod, drills, taps, reamers, etc.Both the...

Flat Shape Diamond Needle File Set provides aggressive yet precise shaping for any hobby on glass, metal, ceramics, marble, wood, plastics, stone, bone etc. Shapes included are Triangle Taper, Flat...

Triangle is made from .022″ thick stainless steel with 1/32″ measuring intervals and metric equivalents on back.

4-packs of Coping Saw Blades 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered...

Sanding sticks (10-1/2″ overall length) with molded plastic handles come in two widths– 1/2″ and 1″. Both are packed with an 11″ long, 120 grit cloth back sandpaper...

One piece metal construction, comes with one adjustable blade. For shaping and smoothing the round surfaces of wooden rods and shafts such as wheel spokes, chair legs, arrows, canoe paddles,...

Zona’s spring-loaded finger sanders have a unique shape for preparing both curved and straight surfaces. Both come with 320 grit sandpaper.37-790 takes a 3/4″ wide sandpaper band and is...

Value priced, plastic c-clamps are lightweight, easy to use and come in two sizes. Model builders and miniaturists will want several sets of these on hand.37-230 Set with one of each size

Fine Point Diamond File Set provides aggressive yet precise shaping for any hobby on glass, metal, ceramics, marble, wood, plastics, stone, bone etc. Shapes included are Round Taper, Triangle Taper,...

4-packs of Coping Saw Blades 6-1/2in. long between pins to fit all standard frames. For precise sawing of wood, plastic, copper and other soft metals. Made from the finest hardened and tempered...

Replacement Sandpaper Bands for 3/4in. wide Finger Sander – 4 per package.240 grit medium (37-792)

Replacement Sandpaper Bands for 3/4in. wide Finger Sander – 4 per package.150 grit coarse (37-791)

Zona’s spring-loaded finger sanders have a unique shape for preparing both curved and straight surfaces. Both come with 320 grit sandpaper.37-795 takes a 1-1/2″ wide sandpaper band and is...

Sanding sticks (10-1/2″ overall length) with molded plastic handles come in two widths– 1/2″ and 1″. Both are packed with an 11″ long, 120 grit cloth back sandpaper...

Replacement Sandpaper Bands for 3/4in. wide Finger Sander – 4 per package.320 grit fine (37-793)

Zona Jeweler?s Saw has 3? cutting depth. Uses scroll, fret or jewelers blades of any size. Frame adjusts to extend the life of broken blades. Cuts all types of metal and plastic. Steel frame with...

Set has 3 removable blades. The 4-1/2in. long blade for large inside cuts or thick material and 2 small keyhole blades, with push and pull style teeth for trimming and shorter cuts. The Saber Saw Set...

Ultra Thin Kerf Razor Saw has a blade that is .008? thick, with a tooth set range of .009/.011? (Zona?s thinnest available), 4-1/2? long, with a 7/16? cutting depth, and steel back for stability...

Thick Kerf Dovetail Saw has a blade that is .020? thick, with a .022/.024? tooth set range, 18 TPI ? teeth per inch, 8? long, with 1-3/4? cutting depth, and steel back for stability. Excellent for...

Medium Kerf Woodcraft Saw has a blade that is .015? thick, with a tooth set range of .016/.018?, 24TPI, 6-1/2? long, with a 7/8? cutting depth, and steel back for stability. Excellent for pull stroke...

5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and...

This is Zona 35670 Coping Saw. Flat wire frame that allows standard pin end coping saw blades to be tensioned for complete control in precise cutting of wood, plastic and metal. Blades can be turned...

5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and...

5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and...

Ultra Thin Kerf Razor Saw has a blade that is .008? thick, with a tooth set range of?.009/.011? (Zona?s thinnest available), 4-1/2? long, with a 7/16? cutting depth, and steel back for stability...

Fine Kerf Universal Razor Saw has a blade that is .010? thick with a tooth set range of .012/.014?, 6-1/2? long, with a 1-3/16? cutting depth, and steel back for stability. For pull stroke cuts in...

Plastic molded miter box 35-250 plus 35-200 Ultra Thin Kerf Saw (32 TPI) for cutting square ends, perfect splices and mitered corners -(has 30, 45, and 90 degree slots) in materials 1/4? thick or...

Inexpensive yet handy saw with sturdy steel frame and finger guard for cutting metal. 9-1/2? overall length. Comes with 6? long, 32 TPI blade.

Fine Kerf Universal Razor Saw has a blade that is .010? thick with a tooth set range of .012/.014?, 6-1/2? long, with a 1-3/16? cutting depth, and steel back for stability. For pull stroke cuts in...

6-1/2? plastic miter box for use with ultra thin kerf saws. Cuts 30, 45, 90 degree angles. Cutting Capacity 1-1/2? wide x 1/4? deep .012 in. slot, adjustable stop, beveled channel. MADE IN USA

4-in-1 general purpose set with 4 removable blades 32 TPI thin kerf 5-1/2? long, 52 TPI ultra thin kerf 4-1/2? long, 24 TPI medium thin kerf 4-1/2? long saber, and a 24 TPI keyhole saber blade 2-1/4?...

5in. long premium quality Metal Piercing Jewelers Saw Blades have extremely fine teeth. Made of hardened and tempered steel for sawing metal and other hardened materials, all blades are 5in. long and...

Lightweight Oiler for plastic-compatible lubricants in hypodermic dispenser is ideal for lubricating hard to reach places. Ideal for RC enthusiasts who prefer to supply their own lubricants.