Track & Accessories

These metal rail joiners are to be used as replacements for originals. They can also be used flex track (LGB 10003/10005). Package of 10 pieces.

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

The 300 mm / 11-13/16“ long tie strip makes it easy to make your own flex track. You need five tie strips (5 each LGB 10003), two rails (2 each LGB 10005), and two metal rail joiners (2 each LGB 10001) to make one 1.5 meter / 59-1/16“ flex track section.

You can create flex track by using these lengths of rail with the tie strip (LGB 10003) and the metal rail joiner (LGB 10001).

The rerailer makes it very easy to place your LGB models on the track: Just place it on a section of LGB straight track and push the model onto the track.

52 mm / 2-1/16“ long straight section of track for a variety of uses.

75 mm / 2-15/16“ long straight section of track. This equals 1/4 of the LGB 10000 track.

This is a 82 mm / 3-1/4" long straight section of track.

150 mm / 5-7/8“ long straight section of track. This section equals 1/2 of the LGB 10000 track.

This set allows you to set up a trouble-free reverse loop circuit for analog operation without additional wiring. The set contains an LGB 10152 separation section of track and a special section of track with built-in electronics. Important: This set is...

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electrical connections. The length of this section of track is...

You need rack rails when you are using LGB rack locomotives on steep grades. Rack rails can be mounted between the regular rails of most LGB track sections by using the LGB 10220 rack rail holders. Each rack rails is 300 mm / 11-13/16“ long. A package...

The rack rail holders are used to mount the rack rails (LGB 10210). The holders snap into place between the ties of most LGB track sections. These holders are easy to install without the need to remove the track. A package has 24 pieces.

Wheel blocks are used to keep cars in place on grades and on sidings and keep them from rolling away. A package has 12 pieces.

Insulated rail joiners allow you to set up isolated block sections of track. To do this the metal rail joiners must be replaced by these sturdy plastic rail joiners. A package has 4 pieces.

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations. This classic bent-rail bumper can still be found in railroad stations...

The shuttle train automatic circuit box allows you have a train shuttle between two stations. An electronic circuit stops the train at the station and then has it reverse direction and go back. This box is easy to install and has adjustable stop duration...

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two manual uncouplers (2 each LGB 10520) or one manual...

These wire holders help keep your wiring manageable. The holder attaches to the side of a section of LGB track. The wires can then be laid easily in the opening.

The curved track in radius R1 is one of the basic pieces in the LGB track assortment. 12 sections of R1, 30° track make a circle (360°).

The radius R1, 15° curved track equals half of the R1, 30° curved track (LGB 11000).

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. Radius R1, 15° curved track.

The track clips keep track sections from coming loose, even during heavy use. They are especially useful for flex track, LGB roadbed, and on temporary layouts. A package has 28 pieces.

LGB turnouts are designed to be sturdy for years of outdoor use. Straight side: 300 mm / 11-13/16“. Branch: right, R1, 30°. The turnout mechanism can be installed on the right or the left side of the turnout. This turnout can be converted to electric...

This electric turnout mechanism is easy to install on all LGB turnouts. You can even control your trains automatically by combining this mechanism with the LGB auxiliary switch (LGB 12070) and other LGB components. The LGB control box (LGB 51755) or its...

Straight side: 300 mm / 11-13/16“. Branch: right, R1, 30°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its equivalent is ideal for controlling this turnout.

This double-pole, double-throw switch can be installed on the LGB turnout mechanism (LGB 12010). It can be used for all kinds of automatic controls for trains, signals, and lighting circuits. Dimensions of the LGB Type 2 auxiliary switch 42 x 14 x 19 mm...

This is a model of a Rhaetian Railroad turnout lantern. This lantern can be mounted on all LGB electric turnouts and on the LGB turnout mechanism (L12010). It is operated with 18 volts.

Straights: 150 mm / 150 mm / 5-7/8“, 185 mm / 7-1/4“. Crossing angle: 90°.

The straight side of the turnout is 440 mm / 17-5/16". The branch track to the right is R3, 22.5°. The manual turnout mechanism can be mounted to the right or left of the turnout. The 12010 electric turnout mechanism can be installed on this turnout.

This sound activating magnet turns sound effects on in many sound locomotives. It can be clipped easily into most LGB track.

These extra wide radius R5 curves make long passenger and freight cars look more prototypical on curved track. 24 sections of curved track in radius R5 with an angle of 15° form a circle (360°).

The curved track in radius R5, 7.5°, is half as long as the curved section of track in radius R5, 15° (LGB 18000).

You can enlarge your LGB starter set circle into an oval with a siding for switching operations and train storage. The sturdy storage box includes: 1 - 12000 manual right-hand switch, 6 - 10000 straight track sections, 1 - 11000 curved track section, 1 -...

You can enlarge your LGB starter set circle into an oval with a passing track. Two trains can pass, one train can park, cars can be switched or a locomotive can be moved from one end of the train to the other. The sturdy storage box includes: 1 - 12000...