Woodland Scenics D238 HO Scale Rocky's Tavern Kit

Woodland Scenics D238 HO Scale Scenic Details Rocky's Tavern Kit\nAssembly is Required \nYou would expect this little dive to be tucked into a back alley. It has signs and posters enticing thirsty customers to come in. 3 1/8" long x 2 1/4" tall (7.93 cm x 5.71 cm)\n15 Metal Castings\n1 sheet Clear Window Material\n1 sheet Dry Transfer Decals\nWire 6 in (15.2 cm)\nInstructions\n\nWhat paint colors were used to paint Rocky's Tavern.\nThe Scenic Details kit Rocky's Tavern was painted with the following paint colors.\nBrick Walls (base color) - Floquil® “Brick”\nRandom Bricks – Polly Scale™ “Antique White” and “Rail Brown”\nStone along bottom of walls – Polly Scale “CN Gray” and “Aged Concrete”\nWeather the structure with a Weathering Wash. Mix 1-part acrylic paint (Concrete or Aged Concrete), 12-parts rubbing alcohol, 8-parts water and 1 drop liquid dish soap. Using a paintbrush, dab on small amounts of wash until desired look is achieved. Sponge off excess.\nHow do I glue together metal castings?\nAlways begin by washing the metal castings in warm, soapy water. Rinse well and let dry. This will remove any remaining mold release agent and allow the glue and paint to adhere better.\n\nGlue Metal Castings with fast-setting epoxy or cyanoacrylate adhesive (super glue). \n\nWhen using super glue, a good bond depends on surface contact. Super glue is not filler-type glue. Use sparingly, too much glue will make a poor bond. Apply a tiny drop onto one of the parts being glued, then hold parts together for about 10 seconds. For larger Castings, hold parts together and apply a small drop of glue where parts meet. Capillary action allows the glue to seep into the contact area, creating a strong bond.\n\nAllow glue to dry completely before moving to the next construction step.\n\nIf the metal castings were painted prior to assembly, be sure to scrape paint off glue points.